Product Features

The melt blown cloth mold cleaning mold oven is suitable for hardware tools and melt blown cloth molds. The melt blown cloth mold cleaning is carried out under constant temperature environmental conditions for drying and various constant temperature adaptability tests.

Technical parameters:

Product Name: Melt blown cloth mold head mold cleaning oven

Model: RPBHX288

Product type: Digital display microcomputer control

Power supply voltage: AC380V ± 10%/50Hz ± 2%

Temperature control range: 100 ℃ -500 ℃

Temperature resolution: 1 ℃

Constant temperature fluctuation: ≤± 2 ℃

Input power: 8KW

Studio size (mm): 800 (width) * 600 (depth) * 600 (height)

Timing range: 0-9999 minutes
Partition: 2 pieces, each with a load-bearing capacity of 100kg

Delivery time: spot supply

Install independent temperature limiting controller: 1 unit

Box structure:

1) This equipment consists of a chamber, heating system, electrical control system, air supply system, protection system, etc.

2) The box is made using equipment and industry manufacturing processes, with smooth lines and a beautiful appearance.

3) The studio material is high-temperature resistant stainless steel, and the outer box material is high-quality cold-rolled steel plate. The product shell is sprayed with metal paint, and the overall design is beautiful and elegant, suitable for color matching in the laboratory.

4) The shelves in the studio can be adjusted in height and quantity according to the user's requirements.

5) The insulation material between the studio and the outer box is high-quality silicon aluminum acid high-temperature cotton, with a insulation layer thickness of>120mm, good insulation effect, and high-performance insulation structure. There is an inner cavity, inner shell, ultra-fine glass fiber, aluminum reflective aluminum foil, and air interlayer from inside to outside, with less heat loss in the inner cavity. The unique structure of the inner and outer compartments, as well as the door liner, greatly reduces the transfer of heat from the inner cavity.

6) High performance sealing materials and unique rubber sealing structure are used between the door and the door frame, with good sealing, high temperature resistance and aging resistance.

7) The air duct inside the box adopts a dual circulation system, consisting of a stainless steel multi wing centrifugal fan and a circulating air duct. The heat of the electric heater placed at the back of the box is discharged forward through the side air duct, and then sucked in by the centrifugal fan at the back after passing through the dry material, forming a reasonable air duct that can fully circulate the hot air and achieve uniform temperature inside the box. Improved the ability of air flow heating and significantly improved the temperature uniformity of the high-temperature chamber.

8) The heater uses stainless steel electric heating tube, which heats up quickly and has a long service life.

Temperature measurement and control system for melt blown cloth mold head mold cleaning oven:

Adopting Japanese Fuji instruments.

Electrical control system:

1) Electrical control components

2) Innovative electrical circuit design, reasonable wiring, safe and reliable

3) On the left side of the box is the electrical control cabinet, which is convenient for centralized inspection and maintenance

Security protection system:

1) Overtemperature alarm

2) Insufficient phase protection

3) Overcurrent protection

4) Quick fuse

5) Grounding protection