VIP member
Product details
1、 Principle Overview
Process flow: Raw water - Cyclone sand removal - Precision filtration - Water storage tank - User
The cyclone desander is based on the principles of centrifugal settling and density difference. When the water flow enters the equipment tangentially from the inlet of the desander under a certain pressure, strong rotational motion is generated. Due to the different densities of sand and water, the low-density clear water rises and is discharged through the overflow port, while the high-density sand is discharged through the bottom sand discharge port, thus achieving the purpose of desanding. Within a certain range and conditions, the higher the inlet pressure of the sand remover, the higher the sand removal rate, and multiple units can be used in parallel.
2、 Product Features
1. The structure is simple, cost-effective, easy to install and operate, and requires almost no maintenance.
2. Compared with sand removal equipment such as expansion pipes and buffer boxes, it has a smaller volume, larger processing capacity, and saves on-site space.
3、 Main technical parameters
1. Material: Carbon Steel
2. Raw water turbidity ≥ 300 degrees
3. Water turbidity ≤ 10 degrees
4. Inlet pressure ≥ 0.2-0.25MPa
5. Head loss 2mm
6. Sand removal diameter>0.1mm
7. Working temperature ≤ 85 ℃
4、 Specifications and Performance Table of Cyclone Desander
|
model
|
Water treatment capacity
|
Water inlet pressure
|
Average sand removal rate
|
Dimensions mm
|
Inlet DN1
|
Water outlet DN2
|
Discharge outlet DN3
|
||
|
m3/h
|
MPa
|
%
|
D
|
H
|
h
|
mm
|
mm
|
mm
|
|
|
DLXL-20
|
20
|
>0.2
|
>96
|
159
|
850
|
650
|
25
|
40
|
20
|
|
DLXL-30
|
30
|
>0.2
|
>96
|
219
|
960
|
650
|
40
|
50
|
20
|
|
DLXl-40
|
40
|
>0.2
|
>95
|
325
|
1150
|
1080
|
50
|
80
|
20
|
|
DLXL-60
|
60
|
>0.25
|
>95
|
325
|
1150
|
1080
|
50
|
80
|
25
|
|
DLXL-70
|
70
|
>0.25
|
>92
|
426
|
1580
|
1300
|
80
|
100
|
25
|
|
DLXL-80
|
80
|
>0.25
|
>92
|
426
|
1580
|
1300
|
80
|
100
|
25
|
|
DLXL-100
|
100
|
>0.3
|
>90
|
426
|
1760
|
1350
|
100
|
125
|
40
|
|
DLXL-150
|
150
|
>0.3
|
>90
|
530
|
1760
|
1350
|
100
|
125
|
50
|
|
DLXL-185
|
185
|
>0.3
|
>90
|
530
|
2000
|
1550
|
125
|
150
|
65
|
|
DLXL-200
|
200
|
>0.3
|
>90
|
650
|
2334
|
1800
|
150
|
200
|
65
|
|
DLXL-300
|
300
|
>0.3
|
>90
|
650
|
2457
|
1800
|
200
|
250
|
80
|
5、 Installation and use
1. The installation of the cyclone sand remover should have a solid foundation, which must be flat and can also be directly installed on the ground.
2. During installation, the pipeline should be connected according to the water flow direction arrow on the device body.
2. During installation, the pipeline should be connected according to the water flow direction arrow on the device body.
3. The cyclone sand remover can be selected according to the actual water treatment capacity. When the flow rate of a single unit cannot meet the requirements, multiple units can be used in parallel.
4. It can be used in series according to the actual processing accuracy.
4. It can be used in series according to the actual processing accuracy.
5. During normal operation, it is necessary to open the inlet and outlet valves and close the drain valve;
6. When the sand in the storage tank of the cyclone desander reaches a certain height, it should be drained. When draining, open the drain valve until clear water flows out.
Please indicate the source when reprinting. Innovation Huayi official website:http://www.chuangxinhuayi.net
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-