Characteristics of Delta series alloy analyzer:

from the United StatesThe third generation portable analyzer technology of Innovat-X company, with 8 overall design technologies in the 2011 version, is a similar product,

1. The detection accuracy is high.

2. Stability and repeatability.

3. Excellent linear correlation.

4. The positive level of rhodium element itself increases the detection result of magnesium element by 2 times.

5. The use of ultra large SDD silicon drift detectors has increased the detection limit/accuracy of elements from magnesium to sulfur by four times.

6. The use of ultra large SDD silicon drift detectors has increased the detection limit of silver element by five times and the detection limit of cadmium element by two times

7. Adopting a completely redesigned radiation tube, no high-voltage power lines, no RF noise, and better X-ray shielding.

8. The structure is more precise, shortening the distance between the radiation tube, detector, and the measured sample, and improving the signal by about 40% for certain applications

9. The new filtering wheel is lighter and thinner, located closer to the tested sample, with 8 filters that can adapt to the highest configuration. Different elements use different filters to produce the best analysis results.

10. More than one-third of the machine body adopts an aluminum alloy shell design, and there is a dedicated slot type heat dissipation device on the top of the instrument. The entire system makes heat dissipation very effective, prolongs machine life, and the X-ray analyzer works more stably, resulting in an extremely low failure rate.

11. The SDD X-ray detector has an astonishing counting rate of up to 200000, which is 10 times higher than the ability of ordinary Si Pin X-ray detectors to obtain data. The large S DD X-ray detector further improves Mg; Al; Si;P; Properties of lightweight elements such as S.

12. The built-in barometer can correct air pressure, and the pressure sensing of the barometer can be adjusted according to different pressures, resulting in more accurate detection values. The instrument is preset at different altitudes, and customers can test at different altitudes without the need for recalibration.

13. The built-in accelerator can detect motion and vibration, allowing the instrument to stand by when not in use and work when picked up.

14. Vacuum system (optional): The vacuum system can improve Mg; Al; Si;P; The detection limit for light elements such as S.

15. The intelligent docking station can charge additional batteries and display the charging progress of the instrument's built-in battery simultaneously. The docking station can connect to a computer to exchange data, allowing the instrument to be standardized in real time and in standby mode at any time.

16. Even when the instrument is turned on, the battery can be replaced without shutting down. When the battery is unplugged during system operation, there is more than 30 seconds to insert a new battery.

17. The instrument does not require standardization when turned on, and can be tested directly. Standardization is only an optional option.

18. The instrument casing is made of aluminum alloy and plastic design, which is sturdy and durable. The handle is designed with soft rubber, which has a good hand feel and is more suitable for long-term use.

19. The instrument has good balance and can stand on the workbench during testing without the need for manual support. With a one click button design, it can operate for a long time without fatigue.

20. The industrial grade touchable display screen and host are integrated with a sealed design, which can withstand harsh outdoor working environments. Sealed instruments can work normally for a long time in rainy and dusty mining environments.

21. According to customer needs, Delta DP2000 (high-end model), Delta DS2000 (standard model), Delta DC2000 (classic model) can be selected, and corresponding software can be developed to cooperate with your use, achieving the most ideal use effect,

25. The Innovat-X China Service Center is always at your service. For more information, please consult. Welcome to call us.

Innov-X Delta 2000 alloy analyzer detects elements and identifies alloy grades and types

1. Detection range: All 83 elements ranging from magnesium (Mg) to plutonium (Pu), with 25 standard elements standard on this machine. Titanium Ti, Vanadium V, Chromium Cr, Manganese Mn, Iron Fe, Cobalt Co, Nickel Ni, Copper Cu, Zinc Zn, Selenium Se, Zirconium Zr, Niobium Nb, Molybdenum Mo, Hafnium Hf, Tungsten W, Tantalum Ta, Rhenium Re, Lead Pb, Silver Ag, Tin Sn, Bismuth Bi, Antimony Sb, Gold Au, Platinum Pt, Palladium Pd.

2. There are 256 commonly used alloy grades that can be recognized, and 300 alloy grades that can be customized by users.

Applications and Fields of Innov-X Delta 2000 Portable Alloy Analyzer

1. Used for on-site, non-destructive, rapid, and accurate analysis and detection of alloy elements and identification of alloy grades

2. Stainless steel incoming inspection; Inventory material management; Re inspection of installation materials

3. In industries such as pressure vessels, power plants, petrochemicals, fine chemicals, pharmaceuticals, etc

4. Metal waste recycling

5. Quality Assurance and Quality Control (QA/QC)

Test Data Report of Innovat-X Delta 2000 Portable Alloy Analyzer