Product Introduction

Brief introduction

The detection accuracy of oil spectrometers is limited by the size of abrasive particles in the analyzed oil sample. When the particle size exceeds 3-8 microns (with varying degrees of restriction for different elements), the reliability of the analysis results of traditional oil spectrometers decreases. But for some heavy equipment, such as large gearboxes and bearings, they will produce approximately 10um of abrasive particles in the early stages of wear. It is obvious that the traditional oil spectrometer has significantly reduced its ability to monitor this wear state.

The equipment is mainly composed of iron materials. When abnormal wear occurs, it will definitely cause a significant increase in abrasive particles, leading to an increase in the concentration of ferromagnetic particles,Spay SuperferrometerFerroCheck 2000Equipped with a high-sensitivity magnetic sensor, it can detect the concentration of ferromagnetic particles at the micrometer to millimeter level within 30 seconds, quickly reflecting the severity of equipment wear. At the beginning of equipment failure, discovering equipment abnormalities can prevent greater losses.

IISpay SuperferrometerProduct Features

1. Meets ASTM D8120-17 standard;

2. FerroCheck is a newly designed portable iron gauge;

3. Mainly used to detect the total amount (concentration, ppm) of ferromagnetic particles in the tested oil sample;

4. FerroCheck can accurately and quantitatively detect suspended ferromagnetic particles ranging in size from nanometer to millimeter in the tested oil sample;

5. Specially used for detecting the total amount of ferromagnetic particles in various lubricating oils;

6. Specially designed grease monitoring dish;

7. Extremely high repeatability accuracy;

8. High temperature stability;

9. Lightweight, powered by nickel cadmium batteries;

10. Fast detection speed: about 30 seconds;

11. Low oil sample consumption:< 2ml.

3、 Detection accuracy

1. Oil sample consumption and consumables: lubricating oil (1.5 ml): dedicated detection dish;
2. Detection limit: 3 ppm;
3. Calibration range: Low range: 0-2000 ppm, High range: 2000-10000 ppm;
4. Repetition accuracy: 3% RSD.