Sonic Sifter Ultrasonic Screening Machine (L3P-25) from the United States

Product features:

1. Gilson ultrasonic vibrating screen from the United States uses ultrasonic vibration method to eliminate sample wear and loss that occurs in conventional vibrating screens, separate dry powder and fine particle materials, and achieve wet screening effect, especially suitable for handling particles that are prone to static electricity and adsorption

2. Stainless steel casing, electronic timer with 24-hour accuracy of ± 2 seconds, can achieve 90% processing efficiency within 10 seconds, saving time

3. Adjustable power, users can set their own power according to the density and texture of different materials

4. Screen capacity: can accommodate 6 standard screens or 3 precision electroplated screens

5. Particle processing range: 5.6mm -3um

6. Standard sieve: Complies with ASTM and ISO standards, with a diameter of 3 "(76mm) and a height of 5/8" (16mm)

7. Precision sieve: Made of electroplated nickel, in compliance with ASTM E161 and ISO standards, capable of processing small particles ranging from 3 microns to 5.6 millimeters

8. Frequency: 60 times/second

9. Power supply: 220V, 50HZ

10. External dimensions (width, height, cm): 25 × 31 × 61

11. Weight: 20Kg

12. Standard configuration: does not include mesh, needs to be purchased separately

Technical parameters:

Screen parameters:

The test screens of the Sonic Sifter sonic screening machine (L3P-25) in the United States have been serialized to meet the traceability level quality assurance system of the measuring equipment. The serial number is marked on each sieve for easy viewing of important information, such as the manufacturing time of the test sieve, the batch number of the mesh cloth used to manufacture each test sieve, the certificate of compliance with ASTM E 11 standard contained in the mesh cloth, and the serial number.

This device can operate normally at any non condensing humidity level within the temperature range of 0 ° to 120 ° F (18 ° to 49 ° C). However, in order to test repeatability, it is recommended to control the ambient temperature and humidity. The sieve and accessories used in this device cannot withstand temperatures above+125 ° F (52 ° C) or below -45 ° F (-43 ° C).

Low energy external vibrations have almost no impact on the accuracy of test results. To achieve the desired effect, the equipment should operate on a stable horizontal surface. This approach helps ensure a uniform layer of particles on each sieve.