VIP member
Solution for Temperature and Humidity Monitoring System in Drug Storage
Article Introduction:
Product details
I. Overview
As a special commodity, drugs are directly related to people's life and health issues. The current storage environment for drugs in the pharmaceutical industryTemperature and Humidity DetectionThe equipment is mainlythermometerTemperature and humidity recorders, most pharmaceutical storage and distribution companies still use traditional thermometers for manual data recording and drug distributiontemperature and humidityLow regulatory level and poor data reliability.
According to the requirements of the new "Quality Management Standards for Drug Operation" issued by the State Administration for Market Regulation, drug wholesale enterprises are required to install temperature and humidity automatic monitoring facilities and equipment in normal temperature warehouses, cool warehouses, cold storage facilities, refrigerated trucks, and vehicle insulated boxes or refrigeration equipment for storing drugs, and connect them to computers to achieve 24-hour automatic real-time monitoring and recording of temperature and humidity data. The monitoring device can automatically alarm when the temperature and humidity exceed the prescribed range, and notify warehouse personnel to take corresponding measures for regulation.
Sibe Electronics has accumulated rich experience in temperature and humidity monitoring in the pharmaceutical industry and has a large number of successful cases nationwide.
2、 Design Basis
(1) Good Manufacturing Practice for Pharmaceutical Products
(2) Drug Administration Law of the People's Republic of China
(3) Implementation Regulations of the Drug Administration Law of the People's Republic of China
(4) Procedures and Requirements for Security and Prevention Engineering GA/T75-94
(5) Code for Design of Intelligent Buildings (GB/T 50314-2000)
(6) Code for Design of Low Voltage Power Distribution (GB 50054-95)
(7) Public Safety Industry Standards of the People's Republic of China (GA 247-2000)
(8) Computer Site Security Requirements
(9) Technical Conditions for Computer Station Site GB2887-89
3、 System performance
1. Progressiveness
The entire system technology maintains a certain foresight, and the equipment and technology used can adapt to future technological developments.2. Reliability
The selected equipment has good electromagnetic compatibility and electrical isolation performance, high system safety and reliability, sufficient anti-interference ability, and does not affect the normal operation of the monitored equipment.
Equipment development and selection adopt highly reliable industrial standards to ensure uninterrupted operation of the system 24/7
3. Stability
The system is mature and stable, supporting interface communication protocols for various mainstream manufacturers' intelligent devices such as air conditioners and fresh air fans4. Real time performance
System data can be transmitted and saved in real-time through the network for future queries and analysis.5. Practicality
The system has a high cost performance ratio, with simplified construction, easy maintenance, user-friendly, and low operating costs.6. Scalability
The system adopts a distributed architecture design, which can adapt to the expansion needs of constantly increasing devices. When the system is expanded, simply adding relevant devices is sufficient.7. Compatibility
The entire system is compatible with different operating platforms: Windows, iOS, Android, LINUX.8. Flexibility
The system has a simple composition, flexible functional configuration, and fully utilizes existing computer resources to meet the needs of different business departments.
9. Maintainability
The system can run online for diagnosis and detection, which can timely detect the faults of various functional units of the system and facilitate the maintenance and handling of system faults.
4、 User needs and analysis
According to relevant information, drugs should be stored in corresponding warehouses according to temperature and humidity requirements, and all types of drug storage warehouses of pharmaceutical companies should maintain a constant temperature. For each drug, it should be stored in a cold storage (2-10 ℃), a cool storage (below 20 ℃), or a room temperature storage (0-30 ℃) according to the storage conditions specified on the drug label. The relative humidity in each storage room should be maintained between 45% and 75%. Install temperature and humidity monitoring in various important parts such as cold storage, cool storage, and room temperature storage as required.
5、 Solution
1. Monitoring content
The storage environment for various expensive electronic devices and pharmaceuticals in pharmaceutical cold storage has high requirements for environmental temperature and humidity. Therefore, it is installed in various important parts of the pharmaceutical cold storageTemperature and humidity sensorOnce an abnormal temperature is detected, an alarm will be triggered immediately.
2. Implementation method
By installing temperature and humidity sensors in important parts of the pharmaceutical cold storage, real-time monitoring of environmental temperature and humidity can be achieved. The current temperature and humidity values can be seen on the surface of the temperature and humidity sensor in real time, and the signal can be connected to the monitoring server platform through the RS485 intelligent interface and protocol converter device of the temperature and humidity sensor using TCP/IP. The monitoring platform software can perform real-time monitoring of temperature and humidity.
3. Implement the structure
4temperature and humiditySub probe parameters:
*Rated voltage and current, DC9V, 500mA (Max: 10mA);
*Measurement range, temperature: -55 ℃~125 ℃, humidity: 0-100% RH;
*Measurement accuracy, temperature: ± 0.5 ℃, humidity: ± 3% RH;
*RS485 communication output;
5. Implement functions
*Real time monitoring of temperature and humidity values within the pharmaceutical cold storage area.
*The system can set threshold values (upper and lower limits) for temperature and humidity parameters. Once an alarm occurs, the parameters that trigger the alarm will turn red and flash. At the same time, an alarm event will be recorded and stored with corresponding processing prompts, and multimedia voice, telephone voice dialing, and mobile SMS will be sent out as soon as possible E-Mail、 External alarms such as sound and light.
*Multimedia voice, telephone voice dialing, mobile SMS E-Mail、 Sound and light alarms can be set as needed.
*When the abnormality is eliminated, a recovery alarm is triggered to notify the user of the elimination of the abnormality.
6. Historical record query
The system can easily query historical records, including EXCEL format and historical curves.
7. Platform performance and functionality
| System Interface | Clear interface structure hierarchy, real-time reflection of data status, scene simulation. Mouse control, easy to operate, customizable main interface according to on-site conditions. |
| Permission Management | Support permission settings, which can be customized by users according to their different permission requirements; |
| Alarm Management | Support multiple methods such as multimedia on-site voice accurate alarm, short message alarm, telephone voice alarm, email alarm, on-site sound and light alarm, etc. Each monitoring object can set the alarm method according to their needs and has precise positioning capability; Support hierarchical and time-sharing alarm, which can be set according to needs; |
| Expansion capability | The platform should have the ability to expand interfaces for future device additions and have the ability to continuously expand with development and changes; It is possible to increase the number of monitoring objects and monitoring points without stopping the operation of the monitoring system, avoiding monitoring blind spots during upgrades. |
havepower and environment monitoring systemmonitoring systemprojectDo you need to move the ring?Just look for Sibe Technology, we have case studies to help you operate projects more easily.Please call: Or consult online!We provide free services for youDynamic environmental monitoring systemProposal and product quotation.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-