P-1 type metallographic sample polishing machine

The P-1 metallographic sample polishing machine (hereinafter referred to as the polishing machine) is suitable for polishing polished samples

Polishing the metal material after exposure to light can obtain a mirror like bright metal surface, which can be used for

Observe and measure the metallographic structure under a microscope.

Overview of structural features

The polishing machine consists of basic elements such as base, disc, polishing fabric, polishing cover, and lid

Component composition. The motor is fixed on the base, and the cone sleeve used to fix the polishing disc is screwed in

The nail is connected to the motor shaft. The polishing fabric is fastened to the polishing disc through a collar, and is electrically charged

After turning on the power through the switch on the base, the motivation can be applied to the sample by hand

Apply pressure to polish the rotating polishing disc. Polishing added during the polishing process

The liquid can flow into the polishing machine through the drainage pipe in the plastic tray fixed on the base

Inside the nearby square plate. Polishing covers and covers can prevent dust and other debris from entering the machine

When used, it falls on the polishing fabric and affects the effectiveness of use.

Technical Parameter

1. Dropping diameter Ø 200mm

2. Selling speed 1400r/min

3. Electric motor 180w 220V 50Hz

4. Dimensions: 315X315X300mm

5. Net weight 16Kg