Product Introduction:

The capillary radiation single cold source heat exchange fresh air dehumidification system independently controls temperature and humidity, avoiding the losses caused by combined heat and humidity treatment in conventional air conditioning systems. It is a flat air conditioning terminal system invented based on the human body's comfort levels of temperature, humidity, noise, air, and sunlight, simulating the principle of biological heat dissipation. It has five core characteristics: constant temperature, constant humidity, constant oxygen, constant static, and constant net.

Operating principle:

Combining fresh air and return air, with a built-in sensible heat exchanger that is processed by coils and sent indoors.

Total heat exchange technology:

It is a ventilation device that can perform heat recovery. When indoor exhaust and fresh air flow through the heat exchanger core in a cross pattern, due to the temperature difference and vapor pressure difference between the airflow on both sides of the partition plate, the two airflow streams exhibit heat and mass transfer phenomena when passing through the partition plate, causing a total heat exchange process.

During summer operation, the fresh air obtains cooling from the air conditioning exhaust, reducing the temperature while being dried by the air conditioning air, resulting in a decrease in the moisture content of the fresh air.

During winter operation, the fresh air obtains heat from the air conditioning exhaust, causing the temperature to rise. In this way, through the total heat exchange process of the heat exchange core, the fresh air can recover energy from the air conditioning exhaust. By exchanging heat between indoor air and outdoor fresh air through heat exchange elements, the residual heat of exhaust is utilized to treat the fresh air, effectively saving energy and solving the problem of fresh air while improving comfort.

Product Features:

1. The combination of fresh air and return air comes with a sensible heat exchanger, which uses low-temperature and low humidity air cooled and dehumidified by coils to exchange heat with outdoor fresh air. This can increase the supply air temperature, meet the comfort requirements of medium temperature supply air, reduce enthalpy, save water consumption, and improve energy efficiency.

2. The device can be equipped with external fresh air valves and return air valves, which can be opened as needed. It can operate in fresh air mode, full return air mode, and mixed air mode.

3. Low temperature water-cooled dehumidification has a wide operating range, reduces the number of fault points, and ensures more stable operation.

4. The equipment is equipped with primary, medium, and high-efficiency three-stage filters, negative ion generators, and UV ultraviolet sterilization lamps, which can filter PM2.5 and kill bacteria.

5. The EC fan speed can be adjusted to effectively ensure the operating air volume.

6. 8-row coil and large windward area for better dehumidification effect.

7. The equipment is fully insulated internally to avoid the risk of condensation.

Technical Specifications:

Equipment size: