Simple SDI Pollution Index Tester

Brand: Procam, USA

SIMPLETechnical Parameter
Application:
Silt density indexSDIValue is an important indicator for characterizing the inlet water quality of reverse osmosis systems, but manual SDI testing methods are extremely time-consuming, and the working process is very monotonous and prone to errors.
Through Simple SDI, automatic data measurement will be achieved, enabling accurate and simple measurement of daily SDI values.
 Simple SDISmall size, light weight, battery powered.
Portable and automatic make it an ideal tool for water system fault inspection and daily monitoring.

characteristic
1. Perform six numerical measurements of 100m and 500ml for SDI5, 10, and 15 minutes, which provide data that cannot be achieved by manual SDI measurement methods. This characteristic is particularly important in high SDI value measurements.
2. No need for a dedicated person to operate, the result will be automatically obtained after 15 minutes of starting the action - saving you time.
3. Real time display of test results, including SDI, current flow rate, and time used. Finally, the values of SDI5, 10, and 15 for 100ml and 500ml will be displayed.
4. The microcontroller achieves more accurate data and provides more useful information than manual measurement (ASTMD4189-95).
5. Battery powered has achieved true portability and can be tested anywhere that requires measurement. (Approximately 13 hours per charge)
6. Using a standard 47mm filtration membrane enables global applicability and reduces usage costs.

Technical Parameter
Dimensions: 273 x 248 x 127 (mm)
Weight: 3.2 kg
Battery: 6V 1.3 AH SLA type
Usage time: 13 hours
Power supply: 220VAC-9VDC 500ma
Inlet pressure: 35-100 psi