UHCSeries side mounted magnetic flip column level gaugeIt is a product developed and produced according to the magnetic level gauge standard HG/T21584-95 issued by the former Ministry of Chemical Industry. Can be used for medium level detection in various towers, tanks, spherical containers, furnaces, and other equipment. This series of magnetic level gauges can achieve high sealing, leak prevention, and adapt to liquid level measurement under high pressure, high temperature, and corrosive conditions, with reliable safety. It compensates for the shortcomings of glass plate (tube) level gauges, such as unclear indication and easy breakage, and is not affected by high and low temperature fluctuations. It does not require the combination of multiple sets of hydraulic gauges. The entire measurement process has no blind spots, with clear display, intuitive readings, and a large measurement range. Especially in the on-site indication section, as it does not come into direct contact with liquid media, its superiority is even more evident for high temperature, high pressure, high viscosity, toxic and harmful, and highly corrosive media. Therefore, compared to its traditional glass tube, the plate level gauge has higher reliability, safety, * * performance, and practicality.
Side mounted magnetic flip column level gaugeThe significant feature of this is that the liquid medium is completely isolated from the indicator, making it very safe, reliable, and durable in any situation. In addition, various models of liquid level gauges are equipped with liquid level alarms and control switches, which can achieve upper and lower limit over limit alarms, control, or interlocking of liquid levels or boundaries; Paired with a static pressure liquid level transmission or a dry spring resistance liquid level transmission, the liquid level can be adjusted. The boundary signal is converted into a two-wire 4-20mADC standard signal to achieve remote indication, detection, recording, and control. This series of side mounted magnetic flip column level gauges is suitable for liquid level measurement and control in various industries such as power, petroleum, chemical metallurgy, environmental protection, shipbuilding, construction, and food production processes.

Side mounted magnetic flip column level gauge (anti-corrosion, remote transmission, alarm)

Side mounted magnetic flip column level gaugeStructural principle
The liquid level gauge is developed based on the principle of buoyancy and magnetic coupling. When the liquid level in the tested container rises or falls, the float in the main tube of the level gauge also rises or falls accordingly. The magnetic steel inside the float is transmitted to the on-site indicator through magnetic coupling to drive the red and white flip columns to flip 180 degrees. When the liquid level rises, the flip column changes from white to red, and when the liquid level drops, it changes from red to white. The red and white boundary of the indicator is the actual height of the medium liquid level in the container, thus achieving the indication of the liquid level.
Side mounted magnetic flip column level gaugecharacteristic
Suitable for measuring the liquid level and boundary of liquid media in containers. In addition to on-site instructions, it can also be equipped with a remote transmission, alarm switch, and control switch, with complete detection functions.
The indication is novel, the reading is intuitive and eye-catching, and the direction of the observation indicator can be changed according to the user's needs.
The measurement range is large and not limited by the height of the storage tank.
The indicator mechanism is completely isolated from the tested medium, resulting in good sealing, high reliability, and safe use.
Simple structure, safe and convenient, low maintenance cost.
Corrosion resistant, no need for power supply, explosion-proof.
Side mounted magnetic flip column level gaugeMain technical parameters
Measurement range: 300-15000mm
Accuracy: ± 10mm, ±16mm
Column diameter: 10mm, 16mm
Work pressure: ≤ 2.5Mpa (2.5Mpa and above can be designed separately) Anti corrosion type ≤. 6Mpa
Medium density: ≥ 0.45g/cm3
Medium density difference: ≥ 0.15g/cm3 (measurement boundary)
Medium density:- 20 ° C+250 ° C (special requirements can reach 450 ° C)
Medium viscosity: ≤ 0.4PaS, for media with high viscosity or media that are prone to crystallization at low temperatures, a heating jacket type liquid level gauge can be selected according to user requirements.
Environmental vibration: frequency ≤ 25Hz, amplitude ≤ 0.5mm
Follow speed: ≤ 0.08m/s

Installation, use, and maintenance
The installation of the liquid level gauge must be vertical to ensure that the magnetic float can move freely up and down inside the main tube.
A shut-off valve should be installed between the liquid level gauge and the container to cut off the material during cleaning and maintenance.
No magnets are allowed to approach the cylinder of the liquid level gauge, otherwise it will directly affect the normal operation of the liquid level gauge.
The liquid level gauge is generally not insulated when it leaves the factory, but it can be insulated according to the user's needs. If the user uses the mixing pipeline themselves, non-magnetic materials must be selected.
To prevent the magnetic float from sliding at high speed inside the main conduit and being impacted during transportation, the level gauge is fixed to the lower drainage pipe with a card wire before leaving the factory. Users should remove the card wire before installation and use.
After the installation of the liquid level gauge is completed, it needs to be calibrated with magnetic steel. The magnetic flip column should be guided once to display red below zero and white above zero.
When the liquid level gauge is put into operation, the upper liquid inlet valve should be opened first, and then the lower liquid inlet valve should be slowly opened to allow the liquid medium to smoothly enter the main pipe, avoiding the rapid rise of the liquid medium with the float, which may cause the magnetic flip column to malfunction or flip randomly (if this phenomenon occurs, magnetic steel can be used to recalibrate).
When opening the bottom flange cover and installing the magnetic float, attention should be paid to the heavy end with the magnetic end facing upwards and not inverted.
There should be no solid impurities or magnetic impurities entering the cylinder of the liquid level gauge to avoid jamming the float and reducing buoyancy.
According to the condition of the medium, the main pipe can be cleaned regularly to remove sediment and impurities inside the pipe.
installation diagram