Precautions for safe use of ship type ultraviolet sterilizer:

1. This product uses a UV sterilizer, and the quartz sleeve has been installed before leaving the factory. When installing the equipment, handle it gently to avoid the sleeve breaking.

2. UV sterilizers should not be installed in places that are too humid or have high impact and vibration. High humidity can easily cause damage to electrical components, while high impact and vibration can cause damage to light tubes and quartz tubes.

3. After the equipment installation is completed, install the randomly worn light tubes into the equipment casing.

4. Before powering on the device, please check if the voltage used matches the voltage indicated on the device (rated voltage indicated on the power plug). If it does not match, please do not use it.

5. The UV sterilizer of this device must be reliably grounded. Do not use it without reliable grounding.

6. This device uses a UV sterilizer, which can cause certain harm to the human body. When using the device, avoid direct exposure of UV rays to the human body.

7. When turning on the device, ensure that there is water supply inside the device before turning on the power supply. Because ultraviolet lamps generate strong heat during operation. Turning on the equipment first and then supplying water will cause the casing inside the equipment to be heated and then cooled, resulting in bursting.

Sterilization characteristics of ship type ultraviolet sterilizer:

1. Widely used for sterilization, it works on almost all microorganisms, bacteria, viruses, and bathroom organisms. And for parasitic insects such as the hidden bun worm and the Giardia, which pose great harm to humans and cannot be effectively killed by ozone, they can be effectively killed;

2. Fast sterilization, high sterilization rate, general microorganisms and bacteria can be killed within a few seconds;

3. Environmentally friendly and safe, with no secondary pollution, pure physical sterilization, and no other side effects;

4. Low operation and maintenance costs;

5. Continuous high flow disinfection;

6. Compact structure and small footprint;

7. Installation is fast, simple, and easy to maintain.

Instructions for using ship type ultraviolet sterilizer

1. The ultraviolet sterilizer of this device is horizontally installed indoors, with the bracket fixed on the designated foundation or workbench. (Connect the inlet and outlet) The sterilization device is located indoors. In addition to considering the convenience of water supply and drainage and meeting the requirements of the process flow, attention should also be paid to leaving an installation position that can extract the ultraviolet lamp tube and space. The electrical control box is installed near the device, with a relative humidity of no more than 80 ℃, no corrosive gases, no conductive dust, and no strong vibration and impact.

2. This product is a pipeline type ultraviolet sterilizer, with two water outlets that can be selected as the inlet and outlet according to the pipeline direction. It can be placed horizontally or vertically according to user needs. To facilitate the replacement of light tubes and quartz tubes, there should be space of the same length on one side as the equipment.

3. After installing the ship type ultraviolet disinfection device, first conduct a water test to ensure that there is no leakage, and then connect the power supply.

4. After connecting the power supply, the indicator light will turn on to ensure that the lamp head and lamp tube are connected properly. Then, press the "power switch" button on the dust cover and the lamp tube indicator light will turn on. The timer will rotate and wait for 3-5 seconds for the lamp tube to light up. At this time, the equipment will run normally. After confirming that the lamp tube is on for 3-5 minutes, first open the water valve, and then open the water inlet valve. At this time, the machine will start running.