Machine model: ZB-802 type Sheet tensile testing machine OneSheet tensile testing machineInstructions The non-metallic material sheet tensile testing machine uses specialized fixtures to conduct tensile tests based on the characteristics of rubber, soft plastic, film or similar materials, and meets the dumbbell shaped specimen tensile requirements specified in GB528, GB529 and other industry standards. The characteristics of the fixture for sheet tensile testing machine are that the tooth shape and material are customized according to different materials, and pre tension force is applied according to requirements. At the same time, it must be ensured that there is no axial gap during the stretching process and the sample cannot be clamped when it breaks. Due to the characteristics of high elongation and low tensile strength of non-metallic sheets, we recommend using a high tensile force of 2500N and a large stroke ZB-802 type Testing machine.

IISheet tensile testing machinetechnical indicators
1. Sensor large range: 2500N (customized according to specific material characteristics)
2. Resolution of test force indication: 1/10000
3. Test force indication error: ± 0.5%
4. Large deformation indication error: ± 1%
5. Displacement rate range: 5-500mm/min
6. Test space: 900mm (including gripper)
7. Test width: 350mm
8. Power supply: 220V/50HZ
9. Power: 400W
10. Machine size: approximately 540 × 900 × 1600 mm in length, width, and height
11. Machine weight: approximately 180Kg. IIISheet tensile testing machineFixture display

The above figure is just one type of fixture for sheet tensile testing machine, which can be redesigned and customized according to specific material characteristics.