product overview

The S Z X-T100 series transmitter is a device that converts vibration signals into 4-20mA current output, in order to connect with user systems such as DCS and PLC, and achieve absolute vibration (or relative vibration, axial displacement, expansion difference, etc.) monitoring and protection of rotating machinery. Users can choose the sensors, measurement units, and ranges they need to equip according to their monitoring needs. In addition to current output, there is also a two pole alarm relay switch output. The product is installed in a standard rail type, with flexible combination, easy installation, and high reliability. It is an indispensable on-site monitoring and protection device for various rotating machinery.

Performance and technical indicators
1. Input signal: (user selected)
SMT series magneto electric speed sensor
SSE series eddy current displacement sensor
SMTA series acceleration sensor
2. Measurement range: (User selected, special can be customized)
Displacement: 0-125/250/500 μ m (peak to peak)
Speed: 0-10/20/50mm/s (effective value)
Axial displacement: 2mm, 4mm; Expansion difference: 8mm, 16mm
Acceleration: 0-50/100m/S2
3. Signal output: DC4 ～ 20mA, Linear error not greater than ± 1% F
·S，

Output load ≤ 500 Ω
4. Frequency response: Connected to eddy current displacement sensor: 0-1000Hz
Magnetic electric speed sensor: 15-1000Hz
Connected to acceleration sensor: 10-1000Hz
5. Alarm output: (User provides set value when ordering)
Warning and danger level alarm relays output normally
Open, Node Capacity: DC 80V/1A,AC125V/0.3A
6. Use power supply: DC24V±10%
7. Working environment: Temperature: -10~+65 ℃, relative humidity ≤ 80%