Product Introduction
The SZ-CS2050X ultrasonic depth and temperature meter is a portable product produced according to the standards of SL/T185-1997 "Ultrasonic Depth Sounder" and JJG (Water Resources) 003-2009 "Ultrasonic Depth Sounder". The UT-X emits 300 watt sonar pulses to the bottom of the water, and the sonar signal is reflected back from the bottom of the water. The depth is calculated based on the sonar transmission time; UT-X analyzes these echo pulses and filters them to obtain accurate depth. Thermistors are used to measure water temperature and air temperature; It can also be equipped with an external GNSS module for precise coordinate positioning of measurement positions and precise time transmission from GNSS satellites; The data is stored in a 32M FLASH memory chip and historical records can be exported through software.
Product Features
※ Installation of cables 10 meters outside (inside) of small and medium-sized ships
Mainly used for underwater positioning and measuring water depth in seas, rivers, and lakes
※ Self stabilizing measurement technology and fast tracking technology, real-time reflection of real measurement results
High precision clock with an annual error of 3PPM
The instrument is equipped with 32M FLASH memory, which automatically stores data by date and can be viewed on the display screen
※ Data is transmitted through RS232 serial port, and software reads historical records
※ Built in battery, external charger
application area
Channel survey, underwater terrain investigation, underwater positioning, hydrographic (river) survey, and ship navigation positioning
Emergency rescue measurement
Hydrological testing, hydropower plants, storage areas, etc
Technical Parameter
performance index | |
range | 50 meters, 100 meters, 150 meters |
power | Automatic adjustment of transmission power gain |
display resolution | ≥1mm |
accuracy | ±0.5% |
display | TFT color screen display |
Operating Frequency | 50-200KHz (ordering requirement) |
Instrument buttons | 16 keyboard |
calibration | Factory calibration, can be calibrated on-site |
Temperature measurement display | -30~70℃ |
GNSS positioning error | 2.0m RMS SBAS Assistance (in open sky) |
Output and storage | |
Connect the RS232 port to the computer, and the serial software can directly read the measurement data | |
Serial port connection: GNSS satellite positioning module, displaying coordinates, altitude, clock and other parameters | |
physical property | |
keyboard | 18 buttons |
material | Host: ABS engineering plastic |
Sensor: Stainless steel | |
weight | Host: 800g |
Sensor: 400~800g | |
sensor cable | Wire diameter 5-10mmx10m |
ENVIRONMENTAL | |
operation temperature | ≤ 80% RH non condensing storage temperature: -40 ℃~70 ℃ |
storage temperature | ≤ 80% RH no condensation detection method: 15Hz/s |
Technical Parameter
performance index | |
range | 50 meters, 100 meters, 150 meters |
power | Automatic adjustment of transmission power gain |
display resolution | ≥1mm |
accuracy | ±0.5% |
display | TFT color screen display |
Operating Frequency | 50-200KHz (ordering requirement) |
Instrument buttons | 16 keyboard |
calibration | Factory calibration, can be calibrated on-site |
Temperature measurement display | -30~70℃ |
GNSS positioning error | 2.0m RMS SBAS Assistance (in open sky) |
Output and storage | |
Connect the RS232 port to the computer, and the serial software can directly read the measurement data | |
Serial port connection: GNSS satellite positioning module, displaying coordinates, altitude, clock and other parameters | |
physical property | |
keyboard | 18 buttons |
material | Host: ABS engineering plastic |
Sensor: Stainless steel | |
weight | Host: 800g |
Sensor: 400~800g | |
sensor cable | Wire diameter 5-10mmx10m |
ENVIRONMENTAL | |
operation temperature | ≤ 80% RH non condensing storage temperature: -40 ℃~70 ℃ |
storage temperature | ≤ 80% RH no condensation detection method: 15Hz/s |