SYLVAC inductance probe P5 P10 P25 description

• Pen type capacitive absolute measurement probe

• Resolution of 0.0001 millimeters

• Measurement range from 5mm to 25mm

Ordinary bearings or ball bearings, integrated vacuum elevator P5

Compatible with all Sylvac numerical units

• Good linearity

Most types of interchangeable cables

SYLVAC inductance probe P5 P10 P25 technical parameters:

model	P5	P10		P25
		P10	P10S	P25	P25S
Travel itinerary mm	5	10		25
Precision Pre level mm	0.7	0.5		0.8
Maximum error Max Error 1) μm	1	1		1.2
Resolution Repeatability μ m	0.2	0.2		0.2
Weight Moving mass g	3.7	4.1		9.6
Force measurement
Standard N	0.60-1.20	0.60-0.80	0.70-1.25	0.60-1.00	0.65-1.4
Minimum N	---	< 0.10	---	< 0.15	---
Low N	0.20-0.25	0.20-0.25	---	0.20-0.30	---
High N	1.00-1.80	0.70-1.50	---	0.70-1.60	---
Maximum Lateral Max N	0.7	0.6	---	0.3	---

1) With Master unit. See as well the specifications of the pair Measuring probe/display unit.
Tolerance ± 20%, measuring probe in vertical position, outgoing spindle.

Pen micrometer P5 P10 P25 Order number:

P5				P10				P25
P5	900.1001	P5BV	900.1005	P10	900.101	P10LLF	900.1014.91	P25	900.1025	P25S	900.1027
P5BL	900.1002	P5L	900.1006	P10LF	900.1010.91
P5V	900.1003	P5BVL	900.1007	P10S	900.1012	P10LS	900.1016
P5B	900.1004	P5LV	900.1008	P10L	900.1014

B = ball bearing / V = Vacuum lifter / L = 90° cable / LF = low force / S = with rubber boot

SYLVAC inductance probe P5 P10 P25 size:

P5 size:

P10 size:

P25 size:

SYLVAC inductance probe P5 P10 P25 standard configuration

Probe according to technical specifications

Calibration certificate

Cable 1.5

Stainless steel contact point with tungsten carbide ball Ø 2mm (905.2204)

SYLVAC Inductive Probe P5 P10 P25 Application:

P5 probes connected to a D302 coupled with D300S for OD, concentricity and cylindricity measurements

P5 probe connected to D302, with D300S added for OD, concentricity, and cylindricity measurements

P5 probes connected to a D50S unitmeasuring the external diameter of a shaft

P5 and D50S are connected to measure the outer diameter of the shaft

Multiple combinations meet measurements at different heights

Combined probes for the measurement of several heights

Connect with D70S

Capacitive probes connected to a D70S.

Connect with D200S application

Capacitive probes connected to a D200S

Used in conjunction with fixtures

Capacitive probes on a jig