VIP member
Product details
-Working principle:
The SP510 water quality hardness tester uses colorimetric measurement to achieve real-time continuous monitoring.
-Application industry:
The SP510 water hardness tester can be used for hardness monitoring of softened water and boiler water quality; Accurately control the softener to regenerate when needed, prolong the water softening retention time, and reduce regeneration costs.
-Instrument features:
When the hardness is too high, the system sends an alarm signal and the water softener starts the regeneration program.
Operate a water softening system that is more reasonable, economical, and effective.
The SP510 water hardness tester has an automatic calibration function.
This water hardness tester can continuously monitor water quality in real-time, with a measurement cycle of about 2 minutes.
A set of * * * can run the water hardness tester continuously for 2 months.
● High cost-effectiveness, suitable for closed-loop control of the system.
The maintenance workload is small, only requiring replacement of the pump tube every 6 months.
| TECHNICAL INDEX | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Selectable monitoring alarm points: | 0.3, 1, 2, 5, 10, 20, 50, and 100mg/L are optional | ||||||||||||||||||||||
| ***Degree: | ± 10% of the set value when 0.3-2mg/L | ||||||||||||||||||||||
| ± 4% of the set value when 5-100mg/L | |||||||||||||||||||||||
| Measurement cycle: | On average, it takes about 2 minutes | ||||||||||||||||||||||
| Alarm output: | 1 SPDT relay | ||||||||||||||||||||||
| Power requirements: | 115/230VAC, 50/60Hz, optional | ||||||||||||||||||||||
| Method authentication: | UL and CSA standards, CE certification
| ||||||||||||||||||||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-