Parameters of SF-280S adsorption single-sided machine:

Design speed: 80m/min.

Width: 1400mm-2200mm.

◆ Leng roller: diameter 280mm.

Characteristics of SF-280S adsorption single-sided machine:

The paper guiding method adopts vacuum adsorption and is equipped with an air volume adjustment device to maintain the stability of the corrugated shape at high speed.

The tile roller and pressure roller bearings are lubricated with grease.

The glue application department adopts automatic circulation glue supply.

The lifting and lowering of the tile roller, pressure roller, and coating roller are all controlled by pneumatic means.

The upper and lower corrugated rollers are made of 52CrMo chromium molybdenum alloy steel, which has been heat-treated and ground to a hardness of HRC58o-60 degrees on the surface.

The glue coating department can be stopped in two ways: independent operation or non independent operation, with the main motor controlled by frequency conversion.

The surface of the glue roller has undergone mesh carving and chrome plating treatment.

The drive gearbox adopts oil immersion lubrication to reduce noise, universal joint transmission, and isolated power source.

Manual or electric rubber isolation device.