SE300 portable multi gas analyzer-Fornitore globale

13th Floor, Building E, Chang'an Center, Financial Street, No. 26 Chengtong Street, Shijingshan District, Beijing

Typical applicationsResearch experiments, blast furnace gas, coke oven gas, biomass pyrolysis gas, synthetic gas, etc

application：

Used for monitoring CO in synthesis gas, gasification gas or other processes, Industrial process gases of any combination of CO2, CH4, H2, and O2.

features：

● High sensitivity CO, CO2, CH4 infrared detectors. Cleanable infrared detectors ensure accuracy and reliability

Long life thermal conductivity H2 based on multi gas analyzer

Long life electrochemical or thermomagnetic oxygen sensors

H2 value compensates for CO, CO2, and CH4 simultaneously

7-inch touch screen display with measurement values

485 data communication and 4-20mA simultaneous output

● Built in anti-corrosion sampling pipeline and accessories

● Built in sampling pump, flow meter, and filter

● Built in battery for portable operation

Durable and sturdy desktop (BT) chassis

● Comes with built-in data collection software to automatically generate spreadsheets

Options:

● Recorder signal output 0-1V or 4-20 mA

● Dehumidification unit for wet sample gas application

● Contestant luggage (K) cabinet

Specific CH4 detectors have replaced standard hydrocarbon detectors; Ensure more accurate measurement of CH4 in other hydrocarbons

The temperature control sensor ensures the best stability (only referring to AC power supply)

All channels can be selected with a high range of 0-100%

Calibration and Calibration:

● Clean air calibration zero and oxygen span range

The mixed standard gas used for calibrating analytical instruments can be used to calibrate gases other than O2

summary:

The SE300 series synthesis gas analyzer uses a durable and cleanable three channel high stability infrared detector to simultaneously measure complex gases such as CO, CO2, and CH4 in synthesis gas and gasification gas. In addition, this instrument can be equipped with an H2 fully compensated thermal conductivity cell. The paramagnetic oxygen detector can also be used to measure the O2 content in the sample airflow. The recorder output is an option. Customers can choose any combination of gases to be tested. The SE300 series analyzer is equipped with a sampling pump, rechargeable battery (if feasible), filter, flow meter and sampling pipeline, four stage filter device, etc.

Technical parameters:

Gas detection:	CO, CO2, CH4, Infrared sensor, O2 electrochemical sensor or paramagnetic sensor, H2 thermal conductivity detector
Range:	0-2.0%, 0-25.0%,0-50.0% O2 0-2.00%, 0-50.0% CO 0-2.00%, 0-50.0% CO2 0-2.00%, 0-50.0% CH4 0-2.0%, 0-50.0% H2	can choose	0-100.0% O2 0-100.0% CO 0-100.0% CO2 0-100.0% CH4 0-100.0% H2
resolving power	%Gas: 0.1%; Low range CO, CO2, And CH4: 0.01%
Accuracy and repeatability	Full range ± 1.0~1.5%, depending on the measured gas
drift	8 hours<1% of full range
Response time T-90	It takes approximately 20-30 seconds to reach 90% of the range
Environmental temperature range	0-50℃
linear	± 1% of the full range of each gas to be tested
Size and weight	25 * 25 * 35 @ Approximately 9kg Physical data depends on specific model and options
Power Supply	220VAC 50Hz
output option	4-20mA, 0-1 VDC or RS232 serial output for each gas to be tested, data acquisition software package