VIP member
Product details
[Technical parameters for material barrel feeding]:
| model | Conveying capacity (kg/h) | Power (kw) | Dimensions (length X width X height) | notes |
| ZJ-1 | 200-500 | 3kw | 1350×420×1250 | Vortex air pump |
| ZJ-2 | 1000-1500 | 5.5kw | 1450x610x1350 | Vortex air pump |
[Main purpose]:
Generally speaking, powder density and particle size determine the method of transportation that should be used, and vacuum transportation is very suitable for powder or granular materials, as it transports powder or granular materials to processing or packaging equipment. For example, in the hoppers of packaging machines, mixers, crushers, injection molding machines, and other equipment, using this equipment can avoid complexity, labor input, and environmental pollution.
[Working principle]:
The operation rule of a vacuum transmission system is that it must be direct and concise. The transmission hopper (feeding bucket) is usually a cone with a filtering device and a vibration device (or blowback device) inside. This feeding bucket sucks out the product from the storage bucket or mobile hopper through a long transfer pipe and brings it into the feeding bucket. When the bucket is in an overflow state, the vacuum system will automatically release it through a set program. The material will fall from the unloading valve due to gravity or be placed into the feeding bin through a pneumatic door opening mechanism. After the feeding bucket is empty, the vacuum system works automatically through a pre-set program, and the next cycle begins again.
Vacuum feeders are widely used in industries such as medicine, food, and fine chemicals. Vacuum feeders have been developed for decades abroad. The application in our country is only in recent years. With the development of vacuum feeder technology, two major series of vacuum feeders have emerged. The electric pump vacuum feeder uses an electric pump as a movable gas source, which is more suitable in situations where there is no large compressed gas source.
Furthermore, the pneumatic pump vacuum feeder uses a radio frequency vacuum generator as the power source. If multiple vacuum feeders are needed in a factory or workshop, a larger compressed air source is required. Therefore, when choosing a vacuum feeder, different vacuum feeders should be selected according to their own conditions.
Vacuum feeder (electric motor)
This device is widely used in packaging machines, mixers, tablet presses, vibrating screen machines, and capsule filling machines
Wet granulation machines and other equipment, vacuum feeding machines are easy to operate, press the feeding switch to feed the pipeline, and the suction process is combined; The vibration device or blowback device blows back to prevent filter blockage. The above two processes are controlled by a time program, so that the feeding vibration or blowback can be carried out in a cyclic manner.
Design and production
Our company extensively solicits opinions from the demand side during the design and production stages of equipment processing, especially in the layout of flat and vertical surfaces, fully considering the site conditions and public engineering conditions of the demand side, so as to ensure the quality of the equipment while optimizing the combination.
Installation and commissioning
When the equipment arrives at the buyer's factory, our company will send dedicated technical personnel to guide the installation and be responsible for debugging to normal use.
training
Before the equipment is used normally by the demand side, our company's debugging personnel will organize training for relevant personnel of the demand side. The training content includes equipment maintenance, upkeep, timely repair of common faults, and operating procedures for the equipment.
quality assurance
Our company's equipment warranty period is one year. During the warranty period, if the equipment is damaged due to non-human factors, we are responsible for free maintenance. If the equipment is damaged due to human factors, our company will promptly repair it and charge a cost fee.
Maintenance and Deadline
Equipment damage that occurs upon expiration of the warranty period shall be repaired on site within two days by enterprises within the province and within four days by enterprises outside the province upon receiving notification from the purchaser. The services provided upon expiration of the warranty period are paid services, and a production fee shall be charged for each service.
Service Commitment
Our company promises to provide lifelong guidance, maintenance, and service for all equipment.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-