SD series three legged upper unloading bag centrifuge

①performance：

SD type three legged suspended bag centrifugeYes, it isThe modified product based on the SS type three legged centrifuge not only retains the advantages of the SS type centrifuge, but also significantly reduces labor intensity, unloads quickly, facilitates cleaning of filter bags, improves production efficiency, and avoids pollution and scattering of finished products caused by manual unloading.Unloading with hanging bags results in low labor intensity and high efficiency.SD tripod bag centrifuge is widely used in industries such as chemical, pharmaceutical, food, light industry, mining, and environmental protection.

②Structure andcharacteristic

1The structural design is reasonable and effectively eliminates hygiene blind spots. The transition of structural components is smooth, and the surface is polished. The external structural components, fasteners, and drum are all made of stainless steel. The shell is flip type, which can thoroughly clean the space between the centrifuge shell and the drum compartment.

2Configure an online cleaning system to perform online cleaning of the centrifuge, cleaning invisible parts inside the centrifuge such as the inner wall of the centrifuge shell, the inner and outer surfaces of the drum, and the surface of the collection tank. conform toGMP standards for equipment

3Transmission and braking: ordinary motor (or explosion-proof motor)+frequency converter+energy consumption braking; Ordinary motor (or explosion-proof motor)+friction type automatic clutch+friction type manual braking device; No foundation form (no foundation chassis and damping pad); Online cleaning system.

4The machine is equipped with a special lifting device when it leaves the factory1 set; On site explosion-proof button.

③working principle:

The SD type three legged hanging bag centrifuge is driven by an electric motor to rotate the drum at high speed. The material is fed into the drum through the top feeding pipe and tends towards the drum wall under the action of centrifugal force. The liquid passes through the centrifuge filter cloth and the drum wall filter hole and is discharged, while the solid is trapped in the drum. After stopping the machine, open the machine cover and loosen the locking pin of the liquid blocking plate. Use a lifting device to lift the liquid blocking plate together with the filter bag containing filter residue to the discharge point. Release the special lifting claw to open one end of the filter bag, and the filter cake will automatically fall down.

④ Structural diagram of SD series centrifuge:



⑤Technical parameters: