S78-3 series machine tool damping pad iron|Machine tool damping pad iron|sizing blockProduct Features
Vibration damping rubber effectively attenuates the vibration of the machine itself, reduces the transmission of vibration force, prevents the transmission of vibration force, improves the precision and quality of machining dimensions, controls the resonance propagation of vibration force and noise in building structures, and enables various machine tools for rough and fine machining to form production units, adapting to the development of logistics technology.
S78-3 series machine tool damping pad iron|Machine tool damping pad iron|sizing blockInstalling the machine tool does not require setting anchor bolts to fix it to the ground, providing good vibration reduction and equivalent vertical deflection, making the machine tool stable on the ground. Save installation costs and shorten installation cycles. The machine bed can be changed at any time according to production, eliminating the cost of secondary installation and making it possible to install the machine tool upstairs.
It can adjust the level of the machine tool, with a wide adjustment range, convenient, and fast.
Used for synthetic rubber, resistant to grease and coolant.
S78-3 seriesMachine tool damping pad iron|Machine toolShock absorber pad iron|Pad ironscope of application
Metal processing machines, satin pressing machines, textile and printing machinery, food processing machines, rubber machinery, wire and cable machinery, packaging machinery, generators, and heavy equipment.
Usage
Place the required shim into the bottom hole of the machine tool, insert the bolt, and rotate it until it is in contact with the load-bearing plate. Then adjust the level of the machine tool (rotate the bolt clockwise to raise the machine tool). After adjusting the level of the machine tool, tighten the nut and fix the horizontal state.
Due to the creep phenomenon of rubber, adjust the machine level again two weeks after the use of the pad iron.

product number	Rubber hardness value	size parameter		Bolt (mm)	It can be described as height (mm)	Single piece static load	Parameter indicators
Ф-H-Sh	Shore（A）	Ф	H	M	h	Fmax（N）	Sz（mm）	t.z（HZ）
S78 040-15-50	50	40	15	M5×30	5	250	1.4	13
S78 080-25-50	50	80	25	M10×80	8	1000	2.8	9.4
080-25-60	60					1700
080-25-70	70					2500
S78 120-32-50	50	120	32	M12×100	12	4000	3.2	88
120-32-60	60					5500
120-32-70	70					8500
120-32-80	80					12000
S78 160-35-50	50	160	35	M16×120（M20）	12	10000	3.3	8.7
160-35-60	60					19000
160-35-70	70					24000
160-35-80	80					35000
S78 185-39-60	60	185	39	M20×160	12	22000	3.6	8.3
185-39-70	70					31000
185-39-80	80					42000
S78 228-54-60	60	228	54	M24×1.5×180（M20）	12	33000	4.5	7.5
228-54-70	70					43000
228-54-80	80					65000
S78 315-70-70	70	315	70	M30×2×200（M30）	12	75000	6	6.4