Product Details/PRODUCT DETAILS

Product features:

1. The rubber press production line usually includes plastic mixer, pre press machine, press machine, sintering furnace, winding device, etc. Pushing machine is a key equipment in the production line, and currently there are two forms of pushing machines used: mechanical transmission and hydraulic transmission.

2. Rubber press machines have excellent physical and chemical properties and are widely used in industries such as national defense, chemical engineering, pharmaceuticals, machinery, electronics, etc.

3. Pushing production line is a specialized equipment for completing the above process. The production line usually includes plastic mixer, pre press machine, pushing machine, sintering furnace, winding device, etc. Pushing machine is a key equipment in the production line, and currently there are two forms of pushing machines used: mechanical transmission and hydraulic transmission.

4. The pushing speed of the mechanical transmission type pusher is basically constant and can be used for multiple purposes, but when overloaded, the equipment is prone to mechanical failure; Hydraulic press machine, after adjusting the regulating valve, the pressure is basically constant, and the pushing speed is first fast and then slow. When overloaded, it is not easy to cause mechanical failures.

Usage principle:

1. Powered by a 2kw motor and reduced by a belt, worm gear, and worm gear, with a speed ratio of approximately 700, it drives the wide mouthed bottles to be mixed to rotate in a vertical plane. 2-6 wide mouthed bottles with a volume of 2L are symmetrically and uniformly fixed in the vertical plane, with a rotation speed of approximately 15

~20rpm.

2. The hydraulic cylinder is connected to the mold, and on both sides of the mold are electromagnetic vibration feeders. The lower part is fixed to the machine base. The hydraulic actuator cylinder is fixed to the upper plate of the interaction table by screws, and the lower machine base box is installed with a specific mold. Electromagnetic vibration feeding machines are installed in the left and right side boxes of the upper part of the interaction table, forming a vertical pushing machine.

3. The hydraulic cylinder is divided into three sections: core pulling cylinder body, transition cylinder body, and compression cylinder body. The piston rod is located in the compression cylinder body Install the compression piston on top, install the core pulling piston on the piston rod of the core pulling cylinder body, and install Y. at the connection points