VIP member
Round pit conveyor belt, anti-skid conveyor belt, granular material conveyor belt
Kunshuo Pattern Conveyor Belt Product Introduction: Pattern rubber conveyor belt is composed of belt body and pattern part. Due to the different mater
Product details
Kun ShuoPatterned conveyor beltProduct Introduction:
The patterned rubber conveyor belt is composed of a belt body and patterned parts. Due to the different materials transported and the inclination angle of the conveyor, the shape and height (depth) of the patterned parts are also required to be different. The commonly used types of patterned conveyor belts are as follows:
Herringbone patternPatterns can be divided into three types: high, medium, and low.
Features: There are "human" shaped patterns on the belt surface that are higher than the belt body, and the patterns can be open or closed, each of which
Usage: Suitable for conveying powdered, granular, and small materials with an inclination angle of ≤ 40 degrees, as well as bagged materials.
Striped pattern
Features: There are strip-shaped patterns on the belt surface that protrude from the belt body horizontally. The patterns are divided into three types: high, medium, and low, and each pattern can be classified into sparse, dense, and other forms according to the arrangement spacing.
Purpose: Suitable for horizontal conveying of packaging materials with an inclination angle of ≤ 30 degrees. If the groove is formed, it can replace the herringbone pattern.
Granular pattern
Features: There are granular patterns on the belt surface that protrude from the belt body or are embedded in the belt body, and the pits can also be made into square holes, edges, and cloth patterns.
Usage: The convex granular pattern is suitable for conveying soft packaging materials or materials that require gripping force (such as cardboard boxes) or non sliding conveying.
The concave granular pattern is suitable for conveying granular materials with an inclination angle of ≤ 45 degrees.
Fan-shaped pattern
Features: There are semi-circular (or 1/4 circular) patterns on the surface of the tape. When the tape is grooved, the patterns merge into a fan-shaped (or semi-circular) pattern, belonging to the high pattern category.
Usage: Suitable for conveying powder, particles, and block materials at large inclination angles of ≤ 60 degrees.
Our company can supply patterned rubber conveyor belts with a width of ≤ 2400mm
A patterned conveyor belt is composed of two parts: a base belt and a patterned belt. Due to the different materials transported and the different inclination angles of the conveyor, the shape and height of the patterned belt are required to be different. Common varieties of patterned conveyor belts include:Herringbone patterned conveyor beltRubber belts with octagonal patterns, fishbone pattern conveyor belts, U-shaped pattern belts, cylindrical pattern belts, dotted pattern tape, etc. Or designed according to user requirements, suitable for conveying powder, granular, and block materials with an inclination angle of less than 30 degrees.
The patterned rubber conveyor belt is composed of a belt body and patterned parts. Due to the different materials transported and the inclination angle of the conveyor, the shape and height (depth) of the patterned parts are also required to be different. The commonly used types of patterned conveyor belts are as follows:
Herringbone patternPatterns can be divided into three types: high, medium, and low.
Features: There are "human" shaped patterns on the belt surface that are higher than the belt body, and the patterns can be open or closed, each of which
Usage: Suitable for conveying powdered, granular, and small materials with an inclination angle of ≤ 40 degrees, as well as bagged materials.
Striped pattern
Features: There are strip-shaped patterns on the belt surface that protrude from the belt body horizontally. The patterns are divided into three types: high, medium, and low, and each pattern can be classified into sparse, dense, and other forms according to the arrangement spacing.
Purpose: Suitable for horizontal conveying of packaging materials with an inclination angle of ≤ 30 degrees. If the groove is formed, it can replace the herringbone pattern.
Granular pattern
Features: There are granular patterns on the belt surface that protrude from the belt body or are embedded in the belt body, and the pits can also be made into square holes, edges, and cloth patterns.
Usage: The convex granular pattern is suitable for conveying soft packaging materials or materials that require gripping force (such as cardboard boxes) or non sliding conveying.
The concave granular pattern is suitable for conveying granular materials with an inclination angle of ≤ 45 degrees.
Fan-shaped pattern
Features: There are semi-circular (or 1/4 circular) patterns on the surface of the tape. When the tape is grooved, the patterns merge into a fan-shaped (or semi-circular) pattern, belonging to the high pattern category.
Usage: Suitable for conveying powder, particles, and block materials at large inclination angles of ≤ 60 degrees.
Our company can supply patterned rubber conveyor belts with a width of ≤ 2400mm
A patterned conveyor belt is composed of two parts: a base belt and a patterned belt. Due to the different materials transported and the different inclination angles of the conveyor, the shape and height of the patterned belt are required to be different. Common varieties of patterned conveyor belts include:Herringbone patterned conveyor beltRubber belts with octagonal patterns, fishbone pattern conveyor belts, U-shaped pattern belts, cylindrical pattern belts, dotted pattern tape, etc. Or designed according to user requirements, suitable for conveying powder, granular, and block materials with an inclination angle of less than 30 degrees.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-