summary:

  The forced circulation evaporator relies on external force - the circulation pump - to circulate the liquid. Its heating chamber has two structures: horizontal and vertical, and the liquid circulation speed is adjusted by a pump. According to the different positions of the inlet and outlet of the separation chamber's circulating liquid, it can be divided into a positive circulation forced evaporator and a reverse circulation forced evaporator. The one with the inlet position of the circulating liquid located above the outlet position is called a positive circulation, and the one with the inlet position above the outlet position is called a reverse circulation. Reverse circulation forced evaporator has more advantages.

The circulation flow rate of liquid in the heating tube is usually within the range of 1.2-3.0 meters per second (when there are many grains in the suspension, the hardness of the pipe used is low, and the viscosity of the liquid is high, a low value is selected). The heating tube can be vertical one-way, vertical two-way, horizontal one-way, or horizontal two-way. The latter two devices have a smaller total height but the tube is not easy to clean and the tube wall is prone to wear and tear.
The head of the circulating pump should match the resistance of the circulating system, usually with a high flow rate and low head. Due to the temperature of the solution approaching the boiling point, attention should be paid to the issue of cavitation when selecting pumps.

Application:This device is suitable for industries such as pharmaceuticals, brewing, food, and beverages, especially for evaporating jams (such as tomato sauce).

Features:

1. Adopting a heat pump heating method, it is efficient and energy-saving, and operates under high vacuum to prevent the solution from undergoing high-temperature denaturation. The precision polishing inside and outside the equipment meets GMP requirements.

2. The equipment mainly consists of a heater, separator, defoamer, steam heat pump, condenser, forced circulation pump, electrical control box, etc.
3. The machine is designed reasonably and easy to operate, and can be designed for semi-automatic or automatic control.

Technical Specifications:Design according to customer requirements