English

Jiangsu Yongsheng Automation Instrument Co., Ltd
Home>Products>QD6000 Intelligent Gas Alarm Controller (LCD Display)
QD6000 Intelligent Gas Alarm Controller (LCD Display)
QD6000 Intelligent Gas Alarm Controller (LCD Display) Intelligent Gas Alarm Controller: QD6000 Multi point Monitoring Combustible Gas Detection and Al
Product details
QD6000 Intelligent Gas Alarm Controller (LCD Display)
 

Intelligent gas alarm controller: QD6000 typeMulti point monitoring combustible gas detection alarm controllerUsed to detect the content of flammable gases or liquid vapors within the lower explosive limit in the air, it can be equipped with multiple detection probes and centrally controlled at multiple points. This system uses a microprocessor as the control unit and high-performance catalytic gas sensors as the detection sensors, with high sensitivity and fast response speed. When the concentration of flammable gases in the environment reaches or exceeds the preset alarm value, the controller immediately issues an audible and visual alarm and drives exhaust or other peripheral devices to prevent explosions and fire accidents, thereby ensuring life. This system can be widely used in factories, oil depots, liquefied gas stations, gas stations, gas stations, paint spraying rooms and other places that require fire and explosion prevention for safety detection and alarm.


  • Technical Specifications

Measurement range:% LEL,% VOL, PPM

Accuracy: ± 3% F.S

Sensor signal: 4-20mA or RS3082

◆ Alarm point: two-level alarm, can be freely set by the user

◆ Preset value: (EX) Low report: 20% LEL High report: 50% LEL

◆ Indication method: LCD displays concentration data, LED indicates alarm or fault status

Output mode: switch quantity MAX 3.0A

◆ Working method: on-site fixed installation, wall mounted

◆ Networking capacity: 4 channels, 8 channels, and 16 channels

◆ Natural diffusion, continuous operation

Working environment: Temperature -20-50 ℃, humidity<95% RH

Working voltage: AC220V ± 10% 50HZ

Power: Monitor Max 6W Sensor Max 1W

Requirements for the connection line between the system and external (gas) detectors:

Standard bus 2-wire connection method, with 2 single core wires with a diameter of ≥ 2.5mm and a length of ≤ 1000m

Standard 3-wire split connection method, with 3 single core wires with a diameter of ≥ 1.5mm and a length of ≤ 1000m

Standard bus 4-wire connection method, with 4 single core wires with a diameter of ≥ 1.5mm and a length of ≤ 1000m.

◆ Appearance size: (320 × 250 × 90) mm

◆ Whole machine weight: 3.2kg


Tested gas

measurement range

Optional range

resolution

response time

Flammable EX

0-100%LEL

0-100% VOL (infrared)

1%LEL/1%vol

≤ 15 seconds

Carbon monoxide CO

0-1000PPm

0-500/2000/5000PPm

0.1/1PPm

≤ 15 seconds

TVOC

0-100PPM

0-100PPM

0.1PPm/1PPM

≤ 20 seconds

hydrogen

0-100%LEL

0-1000PPM

1%LEL/1PPM

≤ 20 seconds

natural gas

0-100%LEL

0-100%LEL

1%LEL

≤ 15 seconds

Oxygen O2

0-30%VOL

0-30%、0-100%VOL

0.1%vol

≤ 15 seconds

Ozone O3

0-10PPm

0-20、100PPm

0.01PPm/0.1PPM

≤ 20 seconds

Hydrogen sulfide H2S

0-100PPm

0-50、200、1000PPm

1/0.1PPm

≤ 15 seconds

methane

0-100%LEL

0-100%VOL

1%LEL/1%vol

≤ 15 seconds

Fluorine gas

0-10PM

0-1、10PPM

1/0.1PPm

≤ 20 seconds

hydrogen chloride

0-20PPm

0-20/50PPm/100PPM

0.01/0.1PPm

≤ 20 seconds

Nitrogen N2

0-30%VOL

0-30%VOL、100%VOL

0.1%LEL/1PPM

≤ 15 seconds

Hydrogen H2

0-100%LEL

0-1000PPm

1%LEL/0.1PPm

≤ 20 seconds

Chlorine gas CL2

0-20PPm

0-10、100PPm

0.1PPm

≤ 20 seconds

Ammonia NH3

0-100PPm

0-50、500、1000PPm

1/0.1PPm

≤ 20 seconds

nitrogen oxides

0-20PPm

0-50、1000PPm

0.1/1PPm

≤ 20 seconds

formaldehyde

0-20PPm

0-50、100PPm

1/0.1PPm

≤ 20 seconds

Sulfur dioxide SO2

0-20PPm

0-50、1000PPm

0.1/1PPm

≤ 20 seconds

Nitric oxide NO

0-250PPm

0-500、1000PPm

1PPm

≤ 20 seconds

Nitrogen dioxide NO2

0-20PPm

0-50、1000PPm

0.1/1PPm

≤ 20 seconds

phosphine

0-20PPm

0-20、100PPm

0.1PPm

≤ 20 seconds

acrylonitrile

0-100PPM

0-100PPm

0.1/1PPm

≤ 20 seconds

carbon dioxide

0-5000PPm

0-1%/5%/10% VOL (infrared)

1PPM/0.01%VOL

≤ 20 seconds

hydrogen fluoride

0-10PPm

0-1、10、50、100PPM

0.01/0.1PPm

≤ 20 seconds

Xylene, toluene

0-20PPm

0-5、10、50、100PPm

0.01/0.1PPm

≤ 20 seconds

Ethylene oxide ETO

0-100PPm

0-100PPm

1/0.1PPm

≤ 20 seconds

Please contact the company for unlisted gases


  • Product accessories

Standard ConfigurationOne gas alarm controller

One key to the main chassis

One manual

One certificate of conformity and warranty card


  • product image




8路液晶主机总线+S100不带显示 -

8路分线液晶主机+S100不带显示

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!