Product Introduction
BaixinPurple Potato Drying MachineCan be used for drying block, strip, sheet and other materials such as purple sweet potato chunks, purple potato chips, purple french fries, and purple potato diced. The drying time varies from 10-20 hours depending on the shape, size, and thickness of the material. Adopting low-temperature (drying temperature between 50-75 ℃) drying technology, the dried products have good color and beautiful appearance. The mesh belt purple sweet potato dryer has low drying cost, simple equipment operation, uses electricity as energy, and has a hygienic production environment, fully meeting the requirements of food production and processing.

Baixin Purple Potato Drying Machine develops standard drying solutions for customers based on their different production conditions in different regions. The drying machine body is made of superior insulation board, with low investment cost. The heating unit adopts fully automatic intelligent control, and the drying temperature and room humidity are set by the user themselves. When the temperature in the drying room reaches the set drying temperature, the heating unit automatically stops working and no longer consumes energy; When the temperature in the drying room is lower than the set temperature (such as 5 ℃ lower than the set temperature), the heating host automatically starts working to provide heat.

Drying process of purple sweet potato mesh belt dryer:
1. Put the processed purple sweet potato material into the conveyor belt for transportation
Adjust the temperature and humidity of the drying box through the control cabinet to meet the requirements of the purple sweet potato dryer. (The specific temperature adjustment depends on the actual situation, and our technical personnel will track and guide the entire process.)
The purple sweet potato material is dried in multiple layers inside the box to remove moisture and achieve the drying effect.
4 purple sweet potato materials are discharged from the discharge outlet.

Working principle
Place the material on the conveyor belt, pass through the material distribution device on the conveyor belt, and lay it flat on the drying machine mesh belt. The material transitions from one layer to the next in the drying machine, and there are guiding and reversing devices between each layer to ensure that the material is fully in contact with the heat carrier; The material flows out from the next layer. The heat carrier is introduced into the dryer by a fan, and the wind speed and pressure generated by the induced draft fan ensure that the heat carrier is fully and evenly distributed at the bottom of the dryer. Due to the lower pressure being greater than the upper pressure, the heat carrier moves upward and passes through each layer of mesh belt, allowing the material to fully contact the heat carrier and improving the drying efficiency.



Technical Parameter

Product specifications	Oven volume	drying cycle (h)	Fresh processing capacity （T/24h）	Supporting power （kw）
BX-1.5*6m	6*2*2.5	0.5-5	12	18.5
BX-1.5*7m	7*2*2.5	0.5-5	15	18.5
BX-1.5*8m	8*2*2.5	0.5-5	20	22.5
BX-1.5*9m	9*2*2.5	0.5-5	22	27.5
BX-1.5*10m	10*2*2.5	0.5-5	25	27.5
BX-1.5*12m	12*2*2.5	0.5-5	30	35.5
BX-1.5*15m	15*2*2.5	0.5-5	30 or above	35.5

Product features:
1. Quick installation and simple structure.
2. Low heat loss, sealed box, low heat dissipation, ensuring sufficient drying of materials.
3. Continuous and uninterrupted drying, with high output and fast speed.
4. Widely applicable, according to different regional conditions, this machine can use coal, natural gas, electricity, etc. as its heat source.
5. High degree of automation and intelligence: adopting automatic temperature control device, 24-hour continuous drying operation.
6. Widely applicable and not affected by climate: It can be widely used in high-temperature hot water and drying system equipment for food, agricultural and sideline products, seafood, paper, wood, leather, chemical, pharmaceutical and other products.