|
Measurement range: 0.74-32 l/h, 16-2 bar |
|
Continuous adjustment of stroke length within the range of 0-100% |
|
Stroke frequency displayed through buttons and large LC * |
|
The flow rate is displayed in units of strokes/min. or l/h |
|
Programmable pressure level setting |
|
3 sets of LED display for start/stop, warning, and malfunction |
|
Hydraulic end material: polypropylene, acrylic/polyvinyl chloride, polyvinylidene fluoride, polytetrafluoroethylene, stainless steel |
|
Polypropylene, acrylic/polyvinyl chloride, polyvinylidene fluoride material pump head belt * coarse/fine adjustment exhaust |
|
The self exhaust hydraulic end is made of polypropylene, acrylic/polyvinyl chloride materials |
|
HV pump head is used for measuring high viscosity media |
|
Equipped with flow monitoring input function, capable of calibrating stroke counter |
|
Optional external control passive contacts with pulse increase and decrease function |
|
Optional external control standard signal 0/4-20 mA |
|
Two stage float level switch interface |
|
Optional 14 day processing timer |
|
Protection level IP65, insulation level F |
|
Power supply: 100-230V, 50Hz; Low voltage 12-24V DC, 24V AC/DC |
|
Medium viscosity: ≤ 200 mPa. s (standard pump head); ≤ 500 mPa. s (with valve spring); ≤ 50 mPa. s (self exhaust) |
|
Optional inlet concentration for proportional dosing |
|
Optional 4-20 mA output corresponding to the product of stroke length and stroke frequency |
|
The combination of power relay and program timer can be converted to higher power (230V-8A) |
|
Power: GALa1000-0220 model is 17W, GALa1605-0232 model is 22W |
|
Intermittent sound pre alarm and continuous sound fault alarm |
|
Profibus ®- DP data bus interface |
|
