Mesh belt dryer is a commonly used continuous production drying equipment, which can be widely used in pharmaceuticals, chemicals, food, and health careProducts, building materials, electronics and other industries are particularly suitable for drying sheet, strip, and granular materials with good breathability, especially for filter cakesPaste like materials can also be dried after being formed by a granulator or extrusion mechanism. Traditional mesh belt dryers have a large volume and take upThe ground space is large, and generally a single-layer mesh belt is used for material drying, which has low efficiency in drying materials and low discharge speed.

Ganlin Drying is designed to fundamentally innovate and improve the technology and manufacturing of traditional single-layer mesh belt dryersThe name is multi-layer belt dryerTechnology, it has a box, three-layer conveyor belt, air outlet, feed inlet, dehumidificationHeating fan, inlet, and outlet have short material operation, uneven heating of materials, and poor drying effect;Due to its high heat loss and resource waste, we have developed a material that is uniformly heatedA multi-layer mesh belt drying device with good drying effect.

(Ganlin Drying - Kangmei Group Drying Site Photo)

1-The total drying stroke is 2000cm, drying 40m2 of the working surface of each conveyor belt, and the entire drying time is 30 minutes-180 minutes.

2- Travel itinerary of each operating layerThe direction is opposite, and the length of the previous conveyor belt is shorter than that of the next conveyor belt along the feeding direction,Beneficial for the materials on the upper conveyor belt to fall into the lower conveyor belt, preventing the dried raw materials from scattering outside the conveyor belt.

3-There is an electrical control cabinet connected to the outside of the drying oven,By controlling the temperature of the drying process towards the interior, it is easy to operate,

The box is fully sealed to ensure that no excess heat is lost

The top of the box is equipped with multiple circulating moisture outlets to ensure that any excess moisture during the material drying process can be promptly expelled from the outside of the box, thereby accelerating the efficiency of material drying

6-Parallel mesh belt travelIn the opposite direction,And the length of the previous conveyor belt is shorter than that of the next conveyor belt along the feeding direction, ensuring that the material falls naturally and does not splash outside the equipment, and the height difference is determined according to the material.

Multiple maintenance doors are installed on the side of the 7-box to minimize equipment maintenance costs to the greatest extent possible

The 8-mesh belt chain plate adopts a quick installation type, and cleaning and replacing the mesh belt can be completed in the maintenance manhole.

9-.....

The parameters are for reference only. For specific parameters, please feel free to call for consultation and communication. (Liu)