Detailed information of powder metallurgy densitometer YD-Q300 copper based density tester:

Standard specification for YD-Q300 copper based density tester for powder metallurgy densitometer:ASTM D792、 ASTM D297、 GB/T1033、GB/T2951、 GB/T3850、 GB/T533、 HG4-1468、 JIS K6268、 ISO 2781、ISO 1183… Waiting for standard specifications.

Measurement type:Non absorbent solids, pastes: such as rubber, plastic, pearl cotton, alloys, powder metallurgy products, dense ceramics, magnetic material products, sealants, asphalt adhesives, silicone, gemstones, rocks, etc., PVC/PE/PP/ABS/PPS and other granular materials; Porous materials: such as porous ceramics, magnetic material blanks, absorbent ores, refractory bricks, foam sponges, carbon brush electrodes, etc

Powder metallurgy densitometer YD-Q300 copper based density tester technical parameters:
(Warranty period: Three years)
model: MZ-C300/C600
Weighing: 300g/600g
Density accuracy: 0.001 g/cm3
Density range: 0.001~99.999g/cm3
Water absorption rate: Water absorption rate, porosity 0.01%, oil content 0.01%
Measurement principle: Archimedes' displacement principle
Measurement time: approximately 5 seconds
Measurement steps: 1. Place it on the measuring table and press the save button to memorize it; 2. On the suspended basket during water release, press the save button to directly display the density and volume of the porous material. According to the national standard, please refer to the accompanying manual for the testing steps
The results show: density, volume, oil content, porosity, water absorption, etc
Parameter settings: water temperature setting, medium liquid density setting
Correction method: One click automatic correction
Output mode: RS-232C standard communication interface, convenient for testing data output and printing
Power Supply: AC~220V / 50HZ

Function description:
For powder metallurgy oil containing bearings, workpieces, die-casting parts, etc., their wet density, oil content, and bulk density can be directly read;
For powder metallurgy sintered products, the apparent density and volume of the product can be directly read;
For powder metallurgy raw materials and blanks, boiling method and vacuum saturation method can be applied to accurately and quickly read the bulk density, wet density, specific gravity, effective porosity and volume of the product;
It has temperature compensation and solution compensation setting functions, and can select the appropriate medium liquid according to the properties of the measured product, quickly reading its density and specific gravity values;
No manual calculation required, 2-3 steps of operation, accurate and fast reading in 5 seconds;
Equipped with fully automatic zero point tracking and the ability to fully remove skin and weight throughout the process;
It has the function of setting the upper and lower limits of specific gravity. When the measured specific gravity value exceeds the set value, the display screen will prompt HI, otherwise it will prompt LO. It is also equipped with a buzzer device to help determine whether the measured sample density is qualified;
Adopting a large water tank design can reduce the error caused by the buoyancy of the suspension line;
Equipped with an RS-232 interface, this device can be easily connected to computers and printers.

Standard accessories:① One host, one sink, one measuring table, one tweezer, one dropper, one weight, one windproof and dustproof cover, one set of particle measuring accessories, one set of float measuring accessories, and one power transformer
Standard documents:① One manual, ② one certificate of conformity, ③ one warranty card, ④ one quick operation instruction, ⑤ one video reference material

after-sale service:
1. All products are original genuine products.
2. All products come with a three-year free warranty and lifetime maintenance. All expenses incurred during the warranty period will be borne by us. (Excluding natural disasters and man-made phenomena)
3. If any products are damaged during transportation, we will bear all responsibilities and guarantee to replace them with new ones within 4 days.
4. Regarding the usage and operation methods, we have the responsibility and obligation to teach the buyer's technical personnel until they are fully proficient.
5. For other detailed purchasing matters, refer to the contract terms agreed upon by both parties.