Portable turbidity suspended solids analyzer
The YTUBSS-2P portable turbidity suspended solids analyzer is developed based on the national standard weight method for measuring suspended solids. T
Product details
This instrument is widely applicable to clean water samples such as surface water and ground water. If it is necessary to measure wastewater with high pollution levels, corresponding treatment and measurement are required. Not suitable for the determination of low turbidity water, the instrument has a low turbidity recognition degree of 3 degrees (NTU).
YTUBSS-2P portable turbidity suspended solids determinationTechnical specifications of the instrument
- Measurement method: Suspended solids: National standard weight method Improved turbidity: GB13200-91 "Determination of Turbidity in Water Quality" Measurement Range: Suspended solids: 5-500 mg/L Turbidity: 0.5-1000NTU (segmented)
- Detection limit: Suspended solids: 5 mg/L Turbidity: 0.5NTU
- Dissolving temperature: No need for digestion
- Colorimetric method: Colorimetric dish colorimetric
- Resolution: 0.001 mg/L
- Accuracy: The indication error shall not exceed 5%
- Repeatability: Relative standard deviation not exceeding 3%
- Optical stability: less than 0.001A/20 minutes
- Power supply: AC (220V ± 5%), 50Hz
- Environmental temperature: 5-40 ℃
- Environmental humidity: ≤ 85% without condensation
- Weight: Host<1.3kg
YTUBSS-2P PortableTurbidity suspended solids analyzerInstrument characteristics
- LCD screen interface design, fully Chinese operation, direct data reading, simple operation.
- Imported cold light source, no preheating required, energy-saving, environmentally friendly, fast response, with a lifespan of up to 100000 hours and strong optical stability.
- Built in standard curve, no need for user calibration and calibration.
- Enable guided measurement with one click operation, simple and fast
- Adopting a digestion colorimetric system, reducing manual operation, the measurement is simple, fast, and safe.
- Customize more than 40 curves and store 200 complete detection data.
- Equipped with power-off protection function to prevent data loss.
- One click factory reset to prevent loss or accidental deletion of standard curves.
- The equipment is not damaged by human factors, with a three-year warranty and software upgrades.
Online inquiry