VIP member
Pool hot water deep well submersible pump 125 ℃
The ATQJR series submersible pump is suitable for the reuse and collection of waste hot water from factory boilers
Product details
ATQJR series submersible pump
scope of application
1. Suitable for the reuse and collection of waste hot water from factory boilers.
2. Collection and reuse of hot water leaked from winter heating pipelines.
3. Used for hot water circulation in the factory (submerged in water for work).
4. It can extract high-temperature hot water leaked from the grooves of the heating pipe network.
5. It can be used for maintenance equipment of heating enterprises.
6. Can be used for loading and unloading hot water in the bathing center.
7. It is widely used for extracting underground hot spring water and other purposes.
Equipment advantages
1. It can extract high-temperature hot water within 180 ℃.
2. Users can use it horizontally when needed (but the lifespan is 60% -80% of vertical)
3. Easy to install, simply place it in the pool and connect it to a power source for use.
4. It is not easy to introduce air, so there is no trouble with pumping.
5. The motor adopts high temperature resistant and water-resistant water lines, with water lubrication, water cooling, and is not easy to pollute the environment.
6. No need to build pump rooms to save infrastructure investment.
7. The equipment operates stably with minimal noise.
Allowable medium range
1. Impurity free clean water, cooling water/chilled water, rainwater, underground water inflow from coal mines, iron mines, metal mines, reference water, mineral water, etc.
2. Allowable working water temperature range+5 ℃ -125 ℃
3. The solid impurity content (mass ratio) shall not exceed 0. 01%
4. pH value (acidity or alkalinity) 6.5-8.5
5. The content of hydrogen sulfide shall not exceed 1.5mg/L
6. The content of chloride ions shall not exceed 400mg/L
7. The unit must operate completely submerged in water.
8. Industrial high-temperature wastewater (if corrosive, inform the manufacturer in advance to replace the material), boiler discharge wastewater, high-temperature mineral water
Motor parameters
1. The submersible motor is lubricated with clean water, and the motor chamber must be filled with clean water before use (otherwise it will reduce the service life of the motor)
If you forget to add water, the motor will quickly burn out
3. Motor protection level: IPX8
4. The electromagnetic wire adopts a high-temperature waterproof line.
5. The motor should be completely submerged in water and used vertically (low-power motors can be used horizontally, but their lifespan is about 60% of that of vertical motors). Its submergence depth should not exceed 70m, and the lowest position should be at least 0.3m away from the bottom of the pool
6. The motor operates continuously. If used in a pool, a guide cover must be installed to cool down the motor.
7. The interior of the motor must be filled with clean water.
power supply
The frequency is around 380V/660V and 50HZ/60HZ. It can be specified in the technical agreement when ordering according to user needs.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-