Product Details/PRODUCT DETAILS

Product features:

1. The polymer membrane pushing equipment operates accurately and reliably, with good synchronization. The mold is specific from the inside The external heater consists of a core mold body and an external mold body. The internal heater is equipped with a cooling water jacket to achieve uniform heating and accurate temperature control. The electromagnetic quantitative feeding machine and scraping device of the electromagnetic vibration feeding machine are used for accurate quantitative feeding and timed feeding, meeting the requirements of different material products. Complete pushing, upward feeding, core pulling, core feeding, and forming Five arts of sintering and other products.

2. Sintering and cooling can be carried out under pressure or in a free state inside the mold. The advantages of this molding method are high product density, good dimensional stability, and suitability for small-sized plates, rods, thick walled tubes, and other products. However, this mutual process has low production efficiency and cannot produce ultra long or thin-walled products. It has high labor strength and high cost. The horizontal manufacturing equipment for ultra-high molecular weight polyethylene, nitrocellulose, and polytetrafluoroethylene imported from abroad can only produce thick walled pipes and cannot produce thin-walled pipes, which cannot meet the needs of users for thin-walled pipes, long rods, and long plates.

3. Restricting the application of products in fields such as grain, mining, chemical, agricultural machinery, transportation, construction, medical, textile, papermaking, printing and dyeing, aerospace, national defense, and nuclear industries.

Usage principle:

1. The task of this utility model is composed of three parts: the main engine, the hydraulic station, and the electrical control box. The hydraulic cylinder is fixed on the interaction table.

2. The hydraulic cylinder is connected to the mold, and on both sides of the mold are electromagnetic vibration feeders. The lower part is fixed to the machine base. The hydraulic actuator cylinder is fixed to the upper plate of the interaction table by screws, and the lower machine base box is installed with a specific mold. Electromagnetic vibration feeding machines are installed in the left and right side boxes of the upper part of the interaction table, forming a vertical pushing machine.

3. The hydraulic cylinder is divided into three sections: core pulling cylinder body, transition cylinder body, and compression cylinder body. The piston rod is located in the compression cylinder body Install the compression piston on top, install the core pulling piston on the piston rod of the core pulling cylinder body, and install Y. at the connection points

Yx type sealing ring and 0-type sealing ring ensure sealing and prevent leakage. They are locked and positioned by elastic snap rings to complete the specific molding work of the inner and outer molds.