Introduction to the filter cartridge dust collector in the paint factory: The resistance of the filter cartridge dust collector in the paint factory increases with the thickness of the dust layer on the surface of the filter material. When the resistance reaches a certain specified value, carry out dust cleaning. In order to ensure the normal operation of the system, the upper limit of the resistance of the dust collector should be maintained within the range of 1400-1600Pa. When this limit is exceeded, the PLC pulse automatic controller should issue commands through fixed resistance or timing to perform three state dust cleaning. Finally, the dust collected in the ash hopper is continuously discharged through the ash discharge valve.

Characteristics of filter cartridge dust collector in paint factory:

1. Adopting a vertical filter cartridge structure for easy dust adsorption and cleaning; Moreover, due to the minimal shaking of the filter material during dust cleaning, the lifespan of the filter cartridge is significantly longer than that of the filter bag, resulting in lower maintenance costs.

2. Adopting the advanced offline three state (filtering, cleaning, and static) cleaning method currently available internationally, the "re adsorption" phenomenon during cleaning is avoided, ensuring thorough and reliable cleaning.

<3. The design includes a pre dust collection mechanism, which not only overcomes the disadvantage of direct dust flushing and easy wear of the filter cartridge, but also greatly increases the dust concentration at the inlet of the dust collector.

4. High quality wear-resistant components are used for key components that affect the main performance (such as pulse valves), and the service life of their vulnerable parts, such as membranes, exceeds 1 million times.

5. By adopting the technique of separately spraying and cleaning dust, one pulse valve can simultaneously spray one column (with a maximum of 12 filter cartridges per column), greatly reducing the number of pulse valves.

6. The pulse valve three state dust cleaning mechanism adopts PLC automatic control, and has two optional control modes: timed or manual.

7. Filter cartridges with different numbers of columns and rows can be combined according to the installation space requirements; The unit filtering area occupies a small three-dimensional space, which can save users a lot of space resources and indirectly reduce their one-time investment costs.

8. Long service life, the service life of the filter cartridge can reach 2 years, greatly reducing the number of times the dust collector needs to replace the filter element (traditional bag filters are replaced on average every 6 months), simple maintenance, and greatly reducing the maintenance cost for users during use.

Paint Factorycartridge filterWorking principle: After the dust containing gas enters the dust hopper of the powder recovery filter, due to the sudden expansion of the airflow section, some coarse dust particles in the airflow settle down under the action of gravity and inertia; After entering the filtering chamber, dust particles with fine particle size and low density deposit on the surface of the filter material through a combination of Brownian diffusion and sieving effects. The purified gas passes through the filter cartridge and enters the clean air chamber of the upper box, where it is collected and discharged from the air outlet.