◎ Pitot tube measuring medium:Gas or liquid compatible with 304 or 316L stainless steel.

◎ Main uses of pitot tube:Measure the total pressure, static pressure, dynamic pressure (i.e. pressure difference) inside the pipeline, and also calculate the flow rate and flow rate.
◎Backrest tube operating temperature:0-900℃
◎Execution standards:National standard JJG518-98
◎Pitot tube usage humidity:≤ 45%RH
◎Measurement flow rate range:Air flow velocity ≤ 70m/s; Water flow rate ≤ 30m/s
◎Backrest tube standard coefficient:L-type is between 0.99 and 1.01; The S-type is between 0.81 and 0.86.

Note: The backrest tube is equipped with the handheld JX1000-1F intelligent instrument produced by our company to input the pitot tube coefficient, air density, and air outlet area. It can directly read pressure, wind speed, and air volume values (three in one interface).

The standard pitot tube is made up of two concentric tubes with different inner diameters. The straight end tail joint of the inner tube is a full pressure tube, and the side joint of the outer tube is a static pressure tube,Effective length: 70-2000mm can be customized

In scientific research, production, teaching, environmental protection, purification rooms, mine ventilation, and energy management departments, pitot tubes are commonly used to measure pipeline wind speed and airflow velocity in furnace flues. After conversion, the flow rate can be determined, and it can also be measured

Measure the water flow velocity inside the pipeline. Using a pitot tube for speed measurement and flow determination has a reliable theoretical basis, is easy to use, accurate, and is a classic and widely used measurement method. In addition, it can also be used to measure the pressure of fluids.