Product Details/PRODUCT DETAILS

Product features:

1. The mold is composed of an internal cooling water jacket, an internal heater, an external heater, a core mold body, an external mold body, a forming section, and a sintering section. It is installed inside the box of the lower machine base of the interaction table. The core mold connecting rod is connected to the core pulling piston rod and the core mold body. The outer side is the pushing piston, the inner side is the spacer, the lower end is the internal heater, the internal temperature measuring element, the internal heating lead installed in the center, the insulation pad is connected on top, and the external internal cooling water jacket is connected on the interaction table The feeding device is installed on top, and the lower part of the interaction table is a heat-insulating cold water plate. The product is located between the core mold body and the outer mold body, and the outer side of the outer mold body is equipped with an external heat conduction sleeve, an external heater, and an external temperature measuring element to ensure uniform heating, accurate temperature control, flexible and reliable core pulling and feeding.

2. Sintering and cooling can be carried out under pressure or in a free state inside the mold. The advantages of this molding method are high product density, good dimensional stability, and suitability for small-sized plates, rods, thick walled tubes, and other products. However, this mutual process has low production efficiency and cannot produce ultra long or thin-walled products. It has high labor strength and high cost. The horizontal manufacturing equipment for ultra-high molecular weight polyethylene, nitrocellulose, and polytetrafluoroethylene imported from abroad can only produce thick walled pipes and cannot produce thin-walled pipes, which cannot meet the needs of users for thin-walled pipes, long rods, and long plates.

3. The hydraulic cylinder is a single cylinder three-stage mobile type, with the pressing cylinder body and the core pulling cylinder body placed in the same cylinder, acting separately to reduce volume, with accurate and reliable action and good synchronization. The mold is specific from the inside The external heater consists of a core mold body and an external mold body. The internal heater is equipped with a cooling water jacket to achieve uniform heating and accurate temperature control. The electromagnetic quantitative feeding machine and scraping device of the electromagnetic vibration feeding machine are used for accurate quantitative feeding and timed feeding, meeting the requirements of different material products. Complete pushing, upward feeding, core pulling, core feeding, and forming Five arts of sintering and other products.

Usage principle:

1. The task of this utility model is composed of three parts: the main engine, the hydraulic station, and the electrical control box. The hydraulic cylinder is fixed on the interaction table.

2. The hydraulic cylinder is connected to the mold, and on both sides of the mold are electromagnetic vibration feeders. The lower part is fixed to the machine base. The hydraulic actuator cylinder is fixed to the upper plate of the interaction table by screws, and the lower machine base box is installed with a specific mold. Electromagnetic vibration feeding machines are installed in the left and right side boxes of the upper part of the interaction table, forming a vertical pushing machine.

3. The hydraulic cylinder is divided into three sections: core pulling cylinder body, transition cylinder body, and compression cylinder body. The piston rod is located in the compression cylinder body Install the compression piston on top, install the core pulling piston on the piston rod of the core pulling cylinder body, and install Y. at the connection points

Yx type sealing ring and 0-type sealing ring ensure sealing and prevent leakage. They are locked and positioned by elastic snap rings to complete the specific molding work of the inner and outer molds.