PMDY110 single-phase rail mounted electric energy meter (2P)

One overview
The PMDY110 rail type energy meter is a new type of single-phase electronic energy metering product developed by our company This product complies with the technical requirements for Class 1 and Class 2 static AC active energy meters in the international standards GB/T17215.321-2008 and IEC62053-21 Suitable for measuring single-phase AC active energy with a reference voltage of 220V or 230V and a frequency of 50Hz or 60Hz This product is suitable for a wide voltage range High reliability Long lifespan, high precision, low power consumption And it has functions such as preventing electricity theft It adopts a guide rail structure design Small size, easy to install Adopting standard 35mm rail installation interface, internationally recognized! It can be widely used for single-phase energy metering and centralized installation in cities, rural areas, or factory enterprises
2、 Parameters and specifications
Voltage: 220V/230V ± 20%
Frequency: 50Hz
Current specification: 1.5 (6) A 2.5 (10) A 5 (20) A 5 (30A 10 (40) A 10 (60) A 20 (80) A
Voltage circuit power consumption: ≤ 1.0W 5VA
Current circuit power consumption: ≤ 1VA (Ib)
Normal operating temperature: -15 ℃ -+55 ℃
Storage and transportation temperature: -25 ℃ -+70 ℃
Environmental humidity: ≤ 85%
Product lifespan: greater than 10 years
Dimensions: 90X66X18
Weight: Approximately 110g
3、 Function and Features
1. Measurement function: It has the ability to measure positive and negative active energy, and accumulate it in the total electricity
2. Use a 6+1-bit step counter to record the accumulated power Optional 6+1-bit LCD display mode
3. Electric energy pulse indication; Power indicator function
4. 35mm DIN rail or board front installation
5. Passive pulse output
6. Adopt high-quality and long-life electronic components Strong overload capacity, no need for calibration for long-term work
4、 Installation dimensions and appearance diagram
35mm standard rail installation width 18mm
Pulse output wiring diagram:
The output of the electric pulse test is a passive optoelectronic isolation method Two wires are connected to the signal terminals SO - (-), SO+(+) respectively