PE60 intelligent pressure controller (differential pressure)-Fornitore globale

1st Floor, Building 2, No. 89 Huguang East Road, Meilian Industrial Park, Minhang District, Shanghai (201108)

product description

The PE60 pressure/differential pressure loosening controller provides 5 relay outputs and 1 analog output, which are used for automatic pressure detection, action control, water level alarm, etc. of equipment, achieving remote pressure measurement and control. When high-frequency switching or high switching accuracy is required.

characteristic

14 segment LED display

● Key programming, easy to operate

5 independent 3A relay control points

● switchable 4-20mA and 0-10V output formats

Record the highest pressure during the work process (can be cleared by pressing the button)

● Supports four installation methods: base plate, guide rail, panel, and flexible joint

● Support 0-99s delay action setting

Technical Parameter

output data
Accuracy:	≤±0.25%FS；≤±0.5%FS
Repeatability:	≤±0.2%FS
Display:	Full of 4 digits, 0.56-inch 14 segment digital display
Temperature drift:	≤± 0.03% FS/℃ (zero/full degree)
analog output
Current type:	4mA～20mA DC， Load resistance ≤ 560 Ω
Voltage type:	0V～10V DC， Load resistance ≥ 10k Ω
Switching Output
Type:	5-way relay, normally open and normally closed contacts
Switching voltage:	≤277V AC； ≤30V DC
Switching current:	≤3A
Response time:	＜1ms
Switch point setting:	1.5%FS～99%FS
Return difference setting:	1%FS～10%FS
life:	≥ 10 million cycles/minimum load; ≥ 100000 times/maximum load
Switch delay:	0s～99s
environmental condition
Working temperature:	-25℃～65℃ / -13℉～149℉
Relative humidity:	0%～85%
Storage temperature:	-40℃～70℃ / -40℉～158℉
Medium temperature:	-20℃～80℃ / -50℉～176℉
Electromagnetic compatibility:	LVD 2006/95/EC&EMC 2004/108/EC
Vibration:	≤5g/10Hz…500Hz（IEC 60068-2- 6-2007）
to attack:	≤10g/11ms（IEC 60068-2-27-2008）
input data
Power supply:	（220±44）V AC/ 22V～32V DC
Range:	0kPa～10kPa… 60MPa
Overvoltage:	1.5 times full range pressure
Static pressure:	20MPa

Exterior structure (unit: mm)

PE60A pressure controller

PE60B differential pressure controller

Installation method

Wall mounted installation

35mm track installation

PANEL MOUNT

Electrical wiring diagram

KAP60A pressure
Standard Range Code Table (Unit: mbar&bar)
Standard range	Gauge pressure code	Absolute pressure code
0…100mbar	GB0,1	AB0,1
0…1bar	GB1	AB1
0…2.5bar	GB2.5	AB2.5
0…4bar	GB4	AB4
0…6bar	GB6	AB6
0…10bar	GB10	AB10
0…20bar	GB20	AB20
0…40bar	GB40	AB40
0…60bar	GB60	AB60
0…100bar	GB100	AB100
0…160bar	GB160	AB160
0…200bar	GB200	AB200
0…300bar	GB300	AB300
0…400bar	GB400	AB400
0…500bar	GB500	AB500
0…600bar	GB600	AB600

KAP60B differential pressure
Standard Range Code Table (Unit: mbar&bar)
Standard range	Differential pressure code
0…350mbar	DB0,35
0…1bar	DB1
0…2.5bar	DB2.5
0…4bar	DB4
0…6bar	DB6
0…10bar	DB10
0…15bar	DB15
0…20bar	DB20
0…25bar	DB25
0…30bar	DB30
0…35bar	DB35

Model Selection Table

PE60A-	Intelligent pressure controller
PE60B-	Intelligent pressure controller
	range
		Gauge pressure (see range code table for range)
		Absolute pressure (see range code table for range)
		Differential pressure (see range code table for range)
		Power supply mode
			22V～32V DC
			220V AC
			output form
				Five relay outputs+analog output (4mA~20mA DC)
				Five relay outputs+analog output (4mA~20mA DC/0V~10V DC multiplexed)
				Process connection
					G1/2 external thread
					M20 × 1.5 external thread
					G1/4 internal thread pressure interface (KAP60B)
The selection form for appeal does not include selection codes. If you need a code, please contact us or fill in your information