Principle, structure
Based on ceramic capacitor technology, when the differential pressure value applied to the ceramic capacitor increases, the capacitance value increases accordingly, and the capacitance value is proportional to the differential pressure value.

characteristic
High precision, high stability, and high reliability, with a unified structural design and strong interchangeability across the entire series. The membrane material in contact with the medium can be selected arbitrarily, and the zero point and range can be continuously adjusted externally. Small size (169mm high), light weight (2.9kg), good one-way overload protection characteristics, pointer or digital on-site indicator. Reverse polarity protection and current limiting protection. Inherent safety explosion-proof or explosion-proof (optional).
application
Gas liquid dual-use type, can be used for hydraulic and pneumatic systems. Applicable to the following industries:
Industrial automation, mechanical equipment, air compression industry, refrigeration and air conditioning, lifting and transmission systems.
Technical Parameter
Range: | Please refer to the table below for details | ||||||||||||
Accuracy level: | ± 0.25% (micro differential pressure ± 0.5%) range | ||||||||||||
Linearity: | ± 0.2% or ± 0.5% | ||||||||||||
Repeatability: | ≤± 0.1% range | ||||||||||||
Temperature impact: | <±0.02%FS/K | ||||||||||||
Working voltage: | 12~36V DC | ||||||||||||
Current consumption: | ≤1KΩ | ||||||||||||
Electrical protection: | Signal current (two-wire), 8mA (three wire) | ||||||||||||
ambient temperature | -30…60℃ | ||||||||||||
Medium temperature: | -30…100℃ | ||||||||||||
Storage temperature: | -20…60℃ | ||||||||||||
Protection level: | Signal current (two-wire), 8mA (three wire) | ||||||||||||
Materials in contact with liquid: | IP65 | ||||||||||||
Sealing material: | Molded aluminum casting | ||||||||||||
Repeat: | 2.9kg |
Electrical wiring diagram

Load characteristic diagram

Installation method
dimension



Model Selection Table
PE-T- | differential pressure transmitter | ||||||
Range code | |||||||
0…+0.1bar | |||||||
0…+0.2bar | |||||||
0…+0.25bar | |||||||
0…+0.3bar | |||||||
0…+0.4bar | |||||||
0…+0.5bar | |||||||
0…+0.6bar | |||||||
0…+1bar | |||||||
0…+1.6bar | |||||||
0…+2.5bar | |||||||
0…+4bar | |||||||
0…+6bar | |||||||
0…+10bar | |||||||
0…+16bar | |||||||
0…+25bar | |||||||
0…+40bar | |||||||
0…+60bar | |||||||
0…+100bar | |||||||
0…+160bar | |||||||
0…+250bar | |||||||
0…+400bar | |||||||
Interface thread | |||||||
Threaded interface NPT1/4 internal thread (can be customized according to user requirements) | |||||||
Connection method | |||||||
internal thread | |||||||
signal output | |||||||
Analog output signal 4-20mA | |||||||
Note: 1bar=1.02kg/cm2=0.1Mpa can be supplied according to the range required by the user | |||||||
The appeal selection does not include the selection code. If you need a code, please contact us or fill in your information |