PARKER Pneumatic Valve Control Module Operation Application

The two hand control modules used in the application need to occupy the operator's hands to send signals in the pneumatic automation system. Two manual control modules provide a pneumatic output signal within 0.5 seconds. If two buttons are operated simultaneously or less, only two buttons will remain in a low state. The event where the output signal will not be sent, the second button operation will be delayed for more than 0.5 seconds.
Function (s): 3/2
Position: 2
Position: Manual Operation
Human operator: button
Installation type: inline
Port size (inches): 5/32 "OD tube
Port type: 5/32 "instant semi-rigid nylon or polyurethane pipe
Flow Max (Cv): 0.17
Certification/Approval:
Vibration resistance, in compliance with some regulations exceeding those of the French Classification Society (November 1987),
Installation: According to the European standard EN 574-1996,
Compliant with the model and obtained CE type test certificate number 02526 02526 520 4631
Pressure range (PSI): 0 to 250
Pressure range (bar): 0 to 17
Temperature range (c): -15-60
Temperature range (F): 5-140
Media: Air
Lubrication: Non lubricating oil
Body Material: Glass filled Nylon

PARKER Pneumatic Valve Control Module Operation Application

The valve model should usually indicate factors such as valve type, driving method, connection form, structural characteristics, sealing surface material, valve body material, and nominal pressure. The standardization of valve models provides convenience for the design, selection, and sales of valves. Nowadays, there are more and more types and materials of valves, and the specification of valve models is becoming increasingly complex. Although there is a unified standard for valve model designation in China, it is increasingly unable to meet the needs of the development of the valve industry. Valve manufacturers generally adopt a unified numbering method; Where a unified numbering method cannot be used, each manufacturing plant shall develop its own numbering method according to its own needs.

The "Valve Model Compilation Method" is applicable to gate valves, throttle valves, ball valves, butterfly valves, diaphragm valves, plunger valves, plug valves, check valves, safety valves, pressure reducing valves, and drain valves used in industrial pipelines. It includes the model designation of valves and the naming of valves.
Valves have a wide range of applications, diverse types, and various classification methods. Overall, it can be divided into two categories:
*Class automatic valve: a valve that operates on its own by relying on the ability of the medium (liquid, gas) itself. Such as check valves, safety valves, regulating valves, drain valves, pressure reducing valves, etc.

Denison valve seat hydraulic lift type ink cartridge design controls the flow direction from port to port B or vice versa depending on the control circuit. The rupture pressure is proportional to the control area seat or ring area. Two hand control modules need to occupy the operator's dual hand pneumatic automation system to send signals before being used for the application. Within 0.5 seconds, only two buttons are activated when generating pneumatic signalsPARKER Pneumatic Valve Control Module Operation Application