Online single parameter analyzerAnalysis method: Adopting online multi parameter measurement

♦ Configuration: Colorimetric configuration - Titration configuration - Ion selection method configuration

♦ Display: Color touch screen

♦ Measurable non heavy metal factors: phosphates, nitrates, chlorides, etc

♦ Automatic cleaning, automatic calibration, automatic verification

♦ Measurement cycle: 1 cycle/10-15 minutes

Online single parameter analyzerhost

Adopting microcomputer control processing unit:

Storage and logical operation functions

touch screen:

Record data and files, save values and results, and store historical records

Network function:

Communication and transmission with local area network, can be remotely operated to view data through 4G connection

24V DC power supply and power supply failure:

24V DC power supply and automatic saving of parameters, historical records, and clock in case of power failure

data collector:

Single chip data acquisition values

Data output function:

Ethernet (standard), USB serial port interface, RS232, RS485 (MODBUS communication protocol)

Signal status:

Calibrate passive points, maintain contacts, remote/local contacts, start analysis, reset analysis, wait analysis, pause analysis.

Analog data output:

High load of 600 ohms, 4-20mA (current blocking) can provide two output quantities

Alarm function:

Machine malfunction alarm and data upper and lower limit alarm

environment

Clean the room with a relative humidity of 2% -95% (no condensation),

10-30 ° C+/-4 ° C deviation (50 ° F-86 ° F+/-7.2 ° F deviation)

Shell:

Protection level IP65 (compliant with DIN40050)

Size (Width 600 x Length 450 x Height 1500MM)

Shipping 40kg, machine shell grounding wire device

piping:

Peristaltic pump, micro pump, diaphragm pump, injection pump, discharge, instrument air, discharge

Cleaning and calibration:

Mineral free purified water/distilled water is used for calibration, cleaning, dilution, etc

basic operation

The analyzer has successfully passed a series of tests for installation and setup. During installation, simply connect the reagent, sample, waste liquid pipeline, and power cord, and set the parameters to start. Automatic calibration, automatic cleaning, automatic testing, and automatic data saving. Long term self-control, low maintenance, low operating costs, fully automatic operation, low chemical consumption, short preparation time, simple maintenance, no need for special electrician training.