1.Application standards and specifications

Online gas calorific valueThe chromatographic analyzer is onlinegas chromatographOnline analysis of impurities in gas can be carried out to monitor changes in component content, providing important reference data for safe operation.

Gas chromatograph uses gas (hydrogen) as the mobile phase (carrier gas). When the sample is carried into the chromatographic column by the carrier gas through the injection system, the components in the sample are separated in the column due to differences in their distribution or adsorption coefficients on the chromatographic column. The separated components are sequentially detected by the detector. The online chromatograph has the characteristics of unmanned operation, high sensitivity, and good stability. The detection signal can be read and displayed directly or transmitted remotely, and all technical indicators can fully meet the relevant provisions of national standards.

2.Environmental conditions for use

power supplyvoltage：AC220V（±10%）

Ambient temperature5℃～35℃

Relative humidity:≤85%

Power:1kw

Injection pressure: ＜0.2Mpa 。

3.Product Performance Description

Analysis medium:Gas.

（1）Column box temperature:

lTemperature control range : Room temperature~500℃

lTemperature control accuracy:±0.1℃

(2) Thermal conductivity detector (TCD):

Baseline noise:≤0.05mv

lBaseline drift:≤0.2mv /30min

lDetection limit:O₂≥8000mv.ml/mg

(3)Instrument dimensions

Volume:450×430×175mm

Weight:20KG

4.Detailed Technical Specifications

Schematic diagram of gas circuit for online chromatograph

1) TheIt can continuously monitor the sample of the gas to be tested.

2) TheA fully automatic analysis instrument that can automatically schedule, sample, analyze, and achieve good separation and analysis results, with reliable data.

3) TheIt can achieve free switching between automatic and manual injection to obtain more reliable data.

4) TheThe instrument is easy to operate, and the injection and sampling time can be set arbitrarily.

5) TheMeasurement object:gas.

6) The first party requests that monitoring data can be uploaded through a 4-20mA interface;

7) Can be equipped with cabinets and necessary pre-processing systems;

8) Meet the corresponding national standards and requirements.