TD-120The water oil monitoring instrument is a continuous, online, solvent-free ultraviolet fluorescence oil detector. Can trigger the process control device to stop, transfer, or dilute the process fluid flow, and allow process control through system functions, sample concentration alarm contacts, and simulated sample concentration outputs.Oil Monitoring Instrument for Dam Pit Water in Hydroelectric Power StationOil Monitoring Instrument for Dam Pit Water in Hydroelectric Power Station

Product Name: UV Fluorescence Online Water Oil Monitoring Instrument

model:TD-120

Monitoring objects: petroleum and hydrocarbons in water

Brand: Turner, USA（Turner Designs）

1、 Instrument Introduction:

Turner, USATurner DesignsThe instrument company is a research and production company of advanced hydrocarbon analyzers and water oil monitoring instruments, with independent technology and rich experience in the field of water oil analyzers.

TD-120It is a cost-effective online water oil monitoring device on the market, which has high sensitivity to oils such as fuel, lubricating oil, and hydraulic oil, with alarm and detection limits below1ppmAt the same time, it is equipped with a chamber cleanliness monitoring function, which can easily verify the cleanliness of the water oil monitoring device.

TD-120useLEDAs a light source,LEDThe lamp source has a long lifespan, which can minimize the impact of light source drift during the service life of the water oil monitoring instrument.TD-120The circulation pool is equipped withSmart SensorIntelligent sensor, sturdy and durable, carrying all calibration data. If the circulation pool needs to be replaced, local technicians can easily operate it on site.

TD-120The chamber cleanliness monitor is the second * sensor inside the instrument. There is no other water oil monitoring device on the market that has this feature. It can inform the operator that the circulation pool is in a clean state and subsequent measurements are effective. If cleaning is required, the chamber cleanliness monitoring function can prove that the cleaning work has been completed. At the same time, users can also confirm calibration using standard solutions through the instrument's built-in injection port.

TD-120Provide real-time response, adapt to process changes, and the instrument's full-scale response time only needs to be less than10In seconds. The instrument is equipped with standard4-20mAThe signal output can indicate the concentration of oil and has4A relay is used for process and system alarm functions.

TD-120The humanized design can be easily and quickly installed and debugged by local technicians.

Meet the standards:

Comprehensive Wastewater Discharge StandardsGB 8978-1996》

Technical Specification for Monitoring Total Discharge of Water PollutantsHU/T92-2002》

Marine Monitoring StandardsGB17378.3-1998》

2、 Detection principle:

TD-120Measure the hydrocarbon content of oil samples through fluorescence. Fluorescence occurs when a molecule (in this case a hydrocarbon molecule) relaxes to its ground state after being excited by electrons. Fluorescent hydrocarbons absorb light-excite-Under a certain wavelength and emitting light-relaxation-At longer wavelengths (lower energy). The emitted light will be filtered and converted into a potential reaction equivalent to the concentration of fluorescent hydrocarbons in the sample.

TD-120The electronic devices and highly sensitive light detectors can detect from one millionth(ppm)Up to one billionth（ppb）Hydrocarbons within the range.

3、 Applicable oils:

1. condensate oil

2. crude

3. diesel oil

4. Heavy fuel

5. jet fuel

6. kerosene

7. lubricant

8. phenol

wait a minute

4、 Application areas:

1Oil leakage monitoring of boiler feedwater and condensate water

2Monitoring of oil leakage in circulating cooling water

3Oil monitoring in the water of the dam pit of a hydroelectric power station

4Production of water/Detection of crude oil content in industrial wastewater

5Monitoring of Hydrocarbons in Ship and Warship Cabin Sewage

6Environmental emergency monitoring

7Other oil testing fields.

5、 Technical parameters:

l Application: Steam condensate water, boiler feedwater, cooling water, water intake protection, water source protection, process optimization

l Applicable hydrocarbons: diesel, fuel oil, crude oil, gasoline, jet fuel, lubricating oil, phenol, heat transfer fluid, aromatic compounds（BTEX）

l Measurement range: LowPPBlevel- 6000PPMThe range depends on the solubility of the oil in water and the background fluorescence

l Size: Wall mounted, long508mmX width140mmX high406mm

l Weight:10.9kg（24 lbs）

l Local color display screen:PPM，PPBOr the original fluorescence value

l Control: External touch keyboard control, allowing viewing of events, history, and maintenance records; Built in tablet for configuration and calibration settings

l Power requirements:100-240VAC 50/60Hz，1.3AValue, single-phase, neutral or live wire (inrush current must not exceed)40AValue)

l signal communication:4-20mASignal output, optional circuit power supply or instrument self power supply; Optional:HARTcommunication protocol

l Alert:4Dry contact alarms that can be set by individual users: early alarm, high concentration alarm, system alarm, chamber cleanliness condition alarm, high temperature alarm

l Pipeline requirements: inlet pipe1/4”, reflux pipe1/4”, flushing tube1/4”

l Sample inlet pressure:10-100psig（69-690 kPag）For higher pressure, please consult the factory

l Sample temperature:0-50°C（32-122°F）For higher temperatures, please consult the factory

l Environmental operating temperature:0-55°C（32-131°F）

l Flow rate: Limit value:0.03-0.79US gallon/Minutes（0.1-3rise/Minutes)

Suggested value:0.26-0.52gallon/Minutes（1-2rise/Minutes)

There are also sample pumps available for selection

l Operating principle: UV fluorescence method

l Response time: default3Seconds (user adjustable, as low as)0.5Seconds), continuous reading

l authentication:EN 61010-1:2010reachEN 61326-1:2013

6、 Performance characteristics:

1Measuring oil in water: Continuous online monitoring devices can measure oil in waterppbperhapsppmConcentration;

2Boiler, cooling system, and environmental protection with the earliest oil leakage detection on the market;

3UV fluorescence technology provides achievable sensitivity;

4Sensitivity=***Low detection limit=Early warning of oil pollution;

5Verified on-siteTD-120It is a sturdy and reliable instrument in the industry that requires * * * low maintenance;

6Its fluorescence sensor provides high accuracy, repeatability, and achievable leak detection. It hasTurner DesignsThe expected significant performance of all products of the hydrocarbon instrument company;

7In your handsTD-120The instrument is complete and ready to be installed in a system with pressurized flow measurement from the process. It contains316SSFixed bracket and isolation valve. To easily return to the process or atmospheric pressure, the sample remains pressurized.

8The chamber condition monitor on the board will remind the user to operate when the measurement chamber needs to be cleaned. Includes standard alarm relays and remote monitoring4-20Milliampere output.

7Regarding Turner in the United States:

Turner Hydrocarbon Instrument Company, USA（Turner Designs Hydrocarbon Instruments, Inc.）, headquartered in California, USA, is a research and development manufacturer of water oil analyzers with advanced independent technology in the field of UV fluorescence oil analyzers. It has a comprehensive product line and rich industry experience, providing users with water oil content detection&Monitor the overall solution.

Turner water oil analyzer products are widely used in oil fields, offshore oil platformsFPSORefineries, petrochemical plants, steel plants, as well as users in environmental protection and monitoring, hydrology and water conservancy, marine and maritime affairs, boiler special inspection, etc., provide excellent product performance and after-sales service to help users improve their petroleum water quality testing technology.

Turner, USATDHIThere is a comprehensive product line that covers various application requirements of users:

TD-500DPortable water oil analyzer (laboratory routine analysis, field emergency monitoring);

TD-550、TD-560: Portable&Desktop 2-in-1 Water oil analyzer (laboratory routine analysis, field emergency monitoring);

TD-120Online Oil Analyzer in Water (Contact Flow Cell);

TD-4100XDC GPOnline Oil Analyzer in Water (Contact Flow Cell, Non Explosion proof Version);

TD-4100XDCOnline Oil Analyzer in Water (Contact Flow Tank, Whole Machine Positive Pressure Explosion proof Version);

TD-4100XD GPOnline oil analyzer in water (non-contact flow tank, non explosion proof version);

TD-4100XDOnline oil analyzer in water (non-contact flow tank, positive pressure explosion-proof version of the whole machine).