■ Product Introduction

This instrument consists of three parts: sensors, measuring brackets, and dedicated computers. The dedicated computer here is the data acquisition display box. When the instrument is working, a dedicated computer can collect displacement data into memory through sensors, and process and display it. In addition, dedicated computers can also be used throughUSBCable andPCCompatible with computer connections and exchanging data. like thisPCComputers can serve as the upper computer of instruments, greatly increasing their processing capabilities. And greatly improve the human-machine interface. The software running on the upper computer is in Simplified ChineseWindowsIt runs in an environment with both real-time animation display and dynamic digital display functions. Under the control of software, the computer automatically prompts personnel for the necessary operations at each step and directly stores the data sampled from the gauge block into the computer. The computer pre stores the required standard gauge block data, and the software automatically adds the sampled data to the standard gauge block data. After verification, the software automatically compiles verification records and certificates, and does not require aiming during operation, which can improve work efficiency by more than double. More importantly, in the process of data transmission, there is no need for personnel to read, write, or calculate data, eliminating the opportunity for errors caused by personnel negligence.

■ Product accuracy

1.Indication error:±(0.020+0.005A)um

2.Range of indication:≥200

3.Adaptation to Work: Second Class to Third Class

■ Instrument completeness

1.Z0.5-28Psensor

2.WS16DP-1Digital display box

3.DELLDesktop computer

4.19Inch LCD display

5.Black and white laser printer

6.USB485TTLCommunication cables

7.Data communication and processing software,

8.Rock measurement bracket

9Reinforced zirconium ceramic main workbench (with additional cost for replacing ball reinforcement)300Yuan).
　　

Note: According to the verification regulations,100mmThe above measuring blocks need to be measured in a supine position using a length measuring machine, soLK500Only for units without measuring machines, for150mmThe above measuring blocks can only4Waiting for transmission5Wait.