Huayi Power is a professional manufacturer specializing in the research and development of portable voltage testers. Huayi Power's portable voltage testers are widely praised in the industry and strive to create the most authoritative "portable voltage tester" high-voltage equipment supplier. Huayi Power's portable voltage tester is a measuring instrument for testing the voltage resistance performance of electronic components, wires and cables, and electronic equipment. It is suitable for testing the safe voltage resistance and leakage current of various motors, appliances, instruments, household appliances, and high-voltage systems.
The AC test voltage of the portable voltage tester is generated by a step-up transformer, and the voltage adjustment is achieved by a voltage regulator. After voltage division and rectification, the output voltage is sent to the voltmeter for indication. The test current is first sampled by a resistor and then rectified into the corresponding voltage through a diode. One path is sent to the ammeter for indication, and the other path is sent to the microprocessor through an A/D converter for comparison with the leakage current setting value, thereby achieving overcurrent alarm control. The portable withstand voltage tester is suitable for testing the safe withstand voltage and leakage current of various motors, appliances, instruments, household appliances, as well as high-voltage systems. This instrument is easy to operate, safe and reliable, with good performance and easy maintenance. It is a testing equipment that meets the testing requirements of GB4706.1 "General Requirements for Safety of Household and Similar Electrical Appliances" and GB9706.1 "General Requirements for Safety of Medical Electrical Appliances", as well as relevant clauses in national standards such as GB4943 and GB4793.
Product nickname: Voltage tester, AC voltage tester, portable voltage tester.
Capacity (kVA) | 1 | |
Output voltage (kV) | range | 0~5kV |
Basic error | ±(5%r+3d) | |
Leakage current (mA) | range | 0.2-200mA |
Basic error | ±(5%r+3d) | |
Alarm current (mA) | 0.2-200mA | |
Test time | 1~99s | |
External dimensions | 440mm×390mm×235mm3 | |
weight | 17kg | |
ambient temperature | 0~40℃ | |
relative humidity | ≤80% | |
power supply | 220V±10%,50Hz |
Attachment List:
Serial Number | name | quantity |
1 | Instrument host | 1 unit |
2 | power line | 1 piece |
3 | instructions | 1 book |
4 | inspection report | 1 copy |
5 | certificate of conformity | 1 sheet |
Note:1. The appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice. If there is any act of theft or copying, legal responsibility will be pursued
2. To learn more about Huayi products, please enter the product center. Service Hotline:
1. Reference standards: GB4706.1-2005;
2. The display mode is digital display;
3. Can display the leakage current value on the tested item during testing;
4. Equipped with time preset and display, testing time countdown;
5. Can display the leakage current value on the tested item during testing;
6. Equipped with time preset and display, testing time countdown;
7. The alarm current value can be set arbitrarily;
8. The output waveform is a 50Hz sine wave;
Product Attachment Diagram
-
Instrument host
-
TEST
-
test bar
-
ground wire
-
power line
-
accessory kit
Product detail diagram
-
appearance
-
the back
-
operation panel
-
at regular time
-
overview
-
Voltage adjustment knob
-
Cable interface
-
screen
-
handle
-
Back interface
-
Test rod plug
-
Test rod contact