1. Design parameters: working volume ≥ 200L, working temperature ≥ 102 ℃;
2. This equipment consists of an extraction tank, a dual filter and sanitary pump, a condenser, a cooler, an oil-water separator, and supporting pipe and valve components;
3. Extraction tank: The reference specification for the inner cylinder is H=1150, D=600，δ=4mm/SUS304， The reference specification for the jacket is H=700, D=800，δ=3/ SUS304, Insulation layer δ=1.5/SUS304, insulation uses asbestos;
4. Condenser: Tube type condenser. Condensation reference area 2.5m2
5. Cooler: coil type condenser. Condensation reference area 0.5m2
6 extraction tanks Equipped with sanitary hand holes, feeding ports, discharging ports, sight lights, sight glasses, thermometer ports, pressure gauge ports, pneumatic slag discharge doors, control cabinets, with polished inner surfaces and frosted outer surfaces; Compliant with GMP requirements;
7. The equipment is equipped with a dual filter DN200, a sanitary pump 1T/H, a head of 24M, and a motor power of 0.75KW
Configure the operation platform with an overall height of ≤ 2.30 meters and a discharge outlet height of ≥ 0.6 meters.

#9. When supplying equipment, relevant documents required for GMP certification must be provided (such as pipeline material certificates, accessory qualification certificates, process flow diagrams with control points, pipeline layout diagrams, etc.). When bidding, previous performance contracts (copies) of the equipment and relevant proof materials such as pipeline material certificates, accessory qualification certificates, process flow diagrams with control points, and pipeline layout diagrams provided during previous supplies must be provided