Tank configuration:
1. Start the manhole quickly;
2. CIP cleaners of various shapes;
3. Sanitary breathable cover for fly and insect prevention;
4. Adjustable triangular legs;
5. Detachable feeding tube kit;
6. Temperature gauge (configured according to customer requirements);
7. Ladder (configured according to customer requirements);
8. Vertical mixer (equipped with slurry or frame type according to customer requirements);
9. Anti vortex board.
Scope of application:
1. Can be used as a storage tank, mixing tank, temporary storage tank, blending tank, etc.
2. Suitable for fields such as food, dairy products, alcoholic beverages, fruit juice drinks, pharmaceuticals, chemicals, and biotechnology.
Structural features:
1. Adopting an inner cylinder with an outer shell, and filling the middle with insulation material;
2. All materials are sanitary grade stainless steel;
3. Humanized structural design, easy to operate;
4. The transition section of the inner wall of the cylinder adopts an R-arc transition, without any sanitary dead corners.
Technical parameters:

Effective volume	Cylinder size	Height	Inlet and outlet caliber	Motor Power	heat preservation	rotational speed
（L）	(mm×mm)	(mm)	(mm)	(kw)	(mm)	(r/min)
500	840×1000	2750	38	0.55	60	The commonly used speeds of 35, 43, and 60 can be selected according to the needs, and the reducer can be a continuously variable reducer or a dual speed reducer.
600	920×1000	2850	38	0.55	60
700	990×1000	2850	38	0.55	60
800	950×1220	3000	38	0.55	60
900	1010×1220	3000	38	0.55	60
1000	1060×1220	3150	51	0.75	60
1500	1160×1500	3350	51	0.75	60
2000	1340×1500	3410	51	1.1	60
3000	1410×2000	4000	51	1.5	60
4000	1620×2000	4250	51	1.5	60
5000	1810×2000	4300	51	2.2	60
6000	1980×2000	4550	51	2.2	60
7000	1930×2440	5000	51	2.2	60
8000	2060×2440	5000	51	3	60
9000	2180×2440	5050	51	3	60
10000	2300×2440	5050	51	3	60
12000	2270×3000	5600	51	4	60
15000	2530×3000	5700	51	4	60
20000	2640×3660	6400	51	5.5	60

Note: If the customer has special requirements, production can be made according to the customer's requirements. The total height (H) is based on the data obtained from the discharge port height of 800mm. If the discharge port height is changed, the total height (H) will be adjusted accordingly.