A heating can is a device used for heating in beverage production lines. In the process of beverage production, the preparation of liquid beverages usually requires various methods of processing various raw materials, and heating is one of the main processing methods. Liquid beverages that usually require hot filling need to maintain a suitable filling temperature before filling to protect the quality of the filled product, so the heating tank is the main equipment for hot filling production.
Scope of application:
1. Can be used as a storage tank, mixing tank, temporary storage tank, blending tank, etc.
Suitable for fields such as food, dairy products, alcoholic beverages, fruit juice drinks, pharmaceuticals, chemicals, and biotechnology.

Structural features:
1. Using an inner cylinder with an outer shell, the middle is heated with a Miller plate, and the outer shell is filled with insulation material;
2. All materials are sanitary grade stainless steel;
3. Humanized structural design, easy to operate;
4. The transition section of the inner wall of the cylinder adopts an R-arc transition, without any sanitary dead corners.
Classified by heating method:
Steam heating and electric heating.
Technical parameters of heating tank:

Effective volume	Cylinder size	Height	Inlet and outlet caliber	Motor Power	heat preservation	rotational speed
（L）	(mm×mm)	(mm)	(mm)	(kw)	(mm)	(r/min)
500	850×1000	2750	38	0.55	60	The commonly used speeds of 35, 43, and 60 can be selected according to the needs, and the reducer can be a continuously variable reducer or a dual speed reducer.
600	930×1000	2850	38	0.55	60
700	1000×1000	2850	38	0.55	60
800	960×1220	3000	38	0.55	60
900	1020×1220	3000	38	0.55	60
1000	1070×1220	3150	51	0.75	60
1500	1170×1500	3350	51	0.75	60
2000	1350×1500	3410	51	1.1	60
3000	1420×2000	4000	51	1.5	60
4000	1630×2000	4250	51	1.5	60
5000	1820×2000	4300	51	2.2	60
6000	1990×2000	4550	51	2.2	60
7000	1940×2440	5000	51	2.2	60
8000	2070×2440	5000	51	3	60
9000	2190×2440	5050	51	3	60
10000	2310×2440	5050	51	3	60
12000	2280×3000	5600	51	4	60
15000	2540×3000	5700	51	4	60
20000	2650×3660	6400	51	5.5	60

Note: If the customer has special requirements, production can be made according to the customer's requirements. The total height (H) is based on the data obtained from the discharge port height of 800mm. If the discharge port height is changed, the total height (H) will be adjusted accordingly.