The KS type mining vibrating screen series is a screening equipment widely used in industries such as mining, metallurgy, coal, electricity, building materials, refractory materials, etc. for large block and small and medium-sized particle materials. Especially in the metallurgical industry, it is the most widely used screening machinery under blast furnace tanks, coking plants, and mineral processing plants. This product has the characteristics of small size, light weight, low energy consumption, easy installation and process layout. It is driven by vibration motors or ordinary motors or self vibration sources, supported and isolated by rubber springs. It has a large processing capacity, high screening efficiency, a large installation inclination angle for the screen mesh, and can be assembled into blocks for easy replacement and long service life.

Characteristics of using mining vibrating screen:
This product has a small volume, light weight, low energy consumption, and is easy to install and process layout. It uses an energy-saving vibration motor as the vibration source, and is supported by rubber springs with large vibration isolation treatment. The screening efficiency is high, and the screen mesh has a large installation angle. The assembled screen mesh is easy to replace and has a long service life.

Technical parameters of mining vibrating screen:

This vibrating screen is suitable for screening materials in industries such as metallurgy, mining, coal, and building materials. The particle size of the incoming material is generally less than 250mm. Screen body structure: Each part of the screen body is welded from rolled steel plates and profiles (some components are connected by high-strength bolts), with good overall rigidity, firm and reliable. The mesh is made of metal wire woven square hole mesh, steel plate mesh, welded mesh, or other types of mesh can be used according to user requirements. The screen body (vibrating part) is supported by springs under the lower base, providing good vibration isolation effect. Mining vibrating screens are generally seat type, but can also be changed to hanging type as needed.

The KS mining vibrating screen is driven by a vibration motor or a regular motor externally or by a self vibration source, causing the screen body to undergo periodic reciprocating vibration along the direction of the excitation force. The material moves in a parabolic motion along a straight line on the screen surface, thereby achieving the purpose of screening. The KS mining vibrating screen consists of an excitation device, a screen box, a dust cover, a hopper, a vibration reduction device, a base, and other parts. When the mining vibrating screen is working, the excitation force generated by the exciter is transmitted to the screen surface inside the screen box through the screen box. As the excitation force generated by the exciter is a longitudinal force, it forces the screen box to drive the screen surface to move forward and backward. Under certain conditions, the material on the screen surface is thrown forward due to the excitation force. When it falls, the material smaller than the screen hole passes through the screen and falls to the lower layer. The motion trajectory of the material on the screen surface is a parabolic motion. Due to this repetitive material movement, the material falls into the screen box from the feeding end, quickly moves forward, loosens, passes through the screen, and completes the screening operation.

The KS series mining vibrating screen consists of a screen box, vibration motor, vibration reduction system, and chassis. The screening box is composed of screening frame, screen plate, lining plate, etc. The side plate of the screening machine is made of high-quality steel plate, and the side plate is connected to the crossbeam and exciter base with high-strength bolts or ring groove rivets. The structure is reasonable, sturdy and durable. The KS series mining vibrating screen uses a vibration motor as the excitation source, and adjusting the excitation force of the vibration motor can change the amplitude of the screen machine. The vibration reduction system consists of rubber springs, support seats, and other components. The installation method of the vibration motor for this series of vibrating screens can be divided into upper vibration type and side vibration type, and the installation method of the vibration reduction device can be divided into seat type or hanging type. It can also be designed and manufactured according to user needs.

Note: Ordering instructions for KS mining vibrating screen:When the customer requests information about the mining vibrating screen, please provide us with the following materials together so that we can provide a prompt and satisfactory response to the customer.
1. The name, specific gravity, moisture content, and temperature during processing of the material to be processed.
2. What results will be achieved, including rough grading, general screening, or other purposes.
3. Production capacity (processing kilograms per hour).
4. Mesh size and screening level of the sieve.
5. Work operation status (single shift, continuous, etc.).
6. Special requirements.
7. The KS series mining vibrating screen has 11 standardized specifications and two structural forms: open and closed. It is suitable for different operating environment requirements. When selecting, please determine the voltage system and whether there are explosion-proof requirements.
8. There are various installation methods for equipment, including support type, hanging type, and combination type. When selecting, please carefully consider them.