Micro constant temperature and humidity test chamber

Micro constant temperature and humidity test chamber?Structure and components:

1.Material of inner and outer boxes:

Inner box:mirror finish

Outer box:Stainless steel or steel plate spraying

2.Insulation material:Hard polyurethane foam+Glass wool

3.controller:JapanOYOOr KoreaTEMIHuman machine interface touch screen controller

4.Freezing system:French Taikang fully enclosed compressor/Environmentally friendly refrigerant

5.Protector:Compressor overheating,Overcurrent,overpressure,Heating, humidification, and air burning,Overheating inside the box,Water shortage alarm system

6.Power Supply:220VAC±10%

7.Standard configuration:Observation window (interior lighting), diameter50mmOne cable hole (located on the left side) and two sets of sample racks (adjustable height)

main accessories:Communication interface, recorder, built-in glass door, and operating hole

?Product parameters:

1.temperature and humidity sensor: PT100Dry wet bulb sensor

2.Temperature and humidity range:temperature:- 20 ~ +150

Humidity:30% ~ 98%RH

3.temperature fluctuation:±0.5linear measure

4.Humidity fluctuation:±1%RH

5.Humidity uniformity:±2linear measure

6.heating up time: -20 ~ +150Degree less than60minute

7.Cooling time: +20 ~ -20Degree less than45minute

8.Product volume（L）:64

9.Internal dimensions（H*W*D）cm： 40 * 40 * 40 can also achieve 30 * 30 * 30

10.Temperature regulation method:BTHCMethod (Balanced Temperature and Humidity Adjustment Method)

11.Ambient Temperature: +5~+35linear measure

12.heater:Nickel chromium alloy electric wire heater

13.humidifier:Shallow groove heating humidifier