TCJ-25Mechanical simply supported beam impact testing machine

Charpy ImpactProduct Introduction:

1Charpy ImpactEquipment usage:

TCJ-25 simply supported beam impact testing machineIt is a new type of impact machine developed by the National Electrochemical Testing and Analysis Center with reference to domestic and foreign materials,Charpy ImpactMeets the requirements of GB1043-93 standard.Charpy ImpactIt is an instrument urgently needed for the research and production process control of impact resistant engineering plastics for domestic vehicles. It can conduct impact tests on metal and non-metal materials, and the factory products are appraised by the National Bureau of Metrology to meet national metrological standards.

IICharpy ImpactMain technical indicators:

1.Charpy ImpactImpact energy: 0-25J

Host: simply supported beam:

Sample span: 40mm, 60mm, 70mm, 95mm

Sample width: 4mm-15mm

Sample thickness: 3mm-10mm

Pendulum impact velocity: V=3.8 m/s

Pre elevation angle: 150 °

Distance from the center of the pendulum axis to the center of the specimen: 380mm

2Charpy Impactenclosure:

2.1. Positioning instrument (span positioning instrument, simply supported beam specimen positioning instrument)

2.2. One set of Allen wrench

2.3. Two supports and washers for the span of simply supported beams

2.4. Host with four horizontal bases

3Charpy ImpactImportant safety guidelines:

Before installing and operating this system, please carefully read all the following instructions and follow all precautions and operating methods.

3.2 Clean the entire machine with a dry cloth and cover it with a cloth to prevent dust.

3.3 Regularly apply a layer of rust proof oil on the hammer head, hammer seat, and their accessories according to the air temperature and humidity conditions.

3.4 This equipment should be placed in a dedicated laboratory and managed by a dedicated person.

4Charpy Impactprecautions

4.1. This equipment should be placed in a dedicated laboratory and managed by a dedicated person.

4.2. Horizontal placement, use a level ruler to adjust the level during installation.

4.3 Install the span of the base bracket according to the manufacturer's sample size. Attention: After replacing the pendulum and base, be sure to slowly lower the pendulum so that it passes through the center of the base before it can be used normally.

Product keywords: simply supported beam impact testing machine; Simply supported beam impact; impact testing machine

Related product links: